Omron, LCD, Digital Counter, 24 V dc

  • RS-stocknr. 163-5152
  • Fabrikantnummer H8PS-8BP
  • Fabrikant Omron
Wetgeving en conformiteit

Omron Digital Counter

The Omron H8PS series digital counter is an LCD display electronic panel mount cam positioner. This counter is logic input, flush mounting and 8 PNP transistor output device. The counter has a voltage rating of 24VDC. It is equipped with useful functions for switching encoder rotation direction, designating the point of origin.

The electrical signal of the absolute encoder is directly related to the angle of the shaft. The mechanical angular position is sensed by non-contact optical elements, therefore without wear. The output of an infrared diode is transmitted through a transparent code disc and diaphragm. The light/dark pattern is converted to an electrical signal by an array of photodiodes. The same code occurs only once per revolution. This encoder is defined as a single turn encoder.

Output circuit

Types of code
Any electronic code is made out of a combination of bits. Each bit is characterised by a low (0) or high (1) signal. The combination of a series of bits is called a binary word. Several binary words make a code.

Single-step code - Only one bit on the parallel output changes state at any given point in time. There is no possibility of any concurrent state changes. Single-step code is very versatile and can maintain accuracy even allowing for slight misalignments of the disc and scanning device

Gray code - This is a Single-step code most absolute encoders use this code.

Multiple-step codes - Natural binary code. This type of code is similar to the decimal system, except that there are only 1 and 0. Each bit, depending on its position in the binary word, has a definite value, 20 to 2n assigned.

Features and Benefits

Easy to adjust using single-function keys
Easy replacement of mechanical cam programmers.
Coder rotation direction change is possible and easy correction at the start point
Backlit liquid crystal display
Front dimension is 96mm x 96mm


Robotic industry


UL approved
CSA certified

Kenmerk Waarde
Supply Voltage 24 V dc
Count Mode Hours
Display Type LCD
Input Type Logic
Mounting Type Flush Mount
Output / Interface Relay
Digit Height 11 mm
Weight 300g
Series H8PS
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
578,00 €
Related Products
DIN 48 x 48 format with a host of functions4-digit counter with simple presettingBacklit LCD displayCounter is simple to program and easily integrated into standardised sectionsComplies with all necessary European standardsFunction selection via DIP switchProtection rating IP66Functions:    - ...
6-digit electro-mechanical totalising counters.Counting speed for pulse / ...
6-digit electro-mechanical totalising counters.Counting speed for pulse / pause ratio = 1:- 20 pulses / sec. in Vdc minimum duration 25 ms / max. unlimited- 10 pulses / sec. in Vac minimum duration 50 ms/max. unlimited.Supplied with plug-in solder clips.Screw ...
Range of resettable counters with data retention rated ...
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are ...
All units are resettable. Panel cut out is ...
All units are resettable. Panel cut out is 22 x 45 with the front fascia sealed to IP65 and has an operating temperature range of -10 to +55°C. Large totaliser displaySelf powered by internal battery which can also be replacedKey ...