Hengstler 6 Digit, Counter, 25Hz, 12 V dc

  • RS-stocknr. 260-634
  • Fabrikantnummer 0 864 161
  • Fabrikant Hengstler
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Multifunctional Counter - Tico 774

Universally applicable as tachometer, timer, shift-counter and batch-counter
Simplified handling
Separate preset adjustment (signal 1, trail preset, range or limit value)
Versatile and easy to program, 4 keys to directly address presets, prescaler and seperate totalizer
Clearly readable display with large digits
Display and preset range: -999 999 to +999 999
Alarm signal: display flashes when preset 0, 1 or 2 are active
Input frequency up to 60 kHz
Relay outputs: 250Vac / 30Vdc / 5A
Easy installation due to pluggable terminals
3 Presets
IP65 protection (front panel)

Typical Applications:

Time controlling
Position indication
Batch counting
Cutting to length
Rotation speed controlling

Hengstler Panel Mounting 48 x 48

Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.

Specificaties
Kenmerk Waarde
Supply Voltage 12 V dc
Count Mode Impulses
Input Type Voltage
Connection Type Screw
Reset Method Manual
Number of Digits 6
Mounting Type Panel Mount
Output / Interface Transistor
Digit Height 4 mm
Maximum Count Frequency 25Hz
Display Range 0 → 999999
Series 864
Measurement Range 0 → 999999
Minimum Operating Temperature -10°C
Maximum Operating Temperature +50°C
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
48,88
(excl. BTW)
59,14
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
48,88 €
5 - 9
46,91 €
10 +
44,87 €
Related Products
Miniature flush mount adding counter5 digits, 4.2mm high500 ...
Description:
Miniature flush mount adding counter5 digits, 4.2mm high500 strokes per minuteRight hand strokeNon-resettableSwitching distance: 46° to 49°Dimensions: H24 x W32 x D22.5mm.
The Kubler 5 digit 24VDC pulse counter comes ...
Description:
The Kubler 5 digit 24VDC pulse counter comes with a digital display. It is a panel mount counter with an electromechanical meter. Its service temperature ranges between -10°C and 60°C. • Compact size• Connection type is flying lead• High shock ...
Panel mounting counters with displays designed for use ...
Description:
Panel mounting counters with displays designed for use in harsh environmentsRemote reset facilityPanel cut out: Rectangular - 45.2mm x 22.4mm, Hexagonal - 36.8mm x 24.1mm, Round - 52mm dia.
All units are non-resettable and are continuously rated,Counters ...
Description:
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the ...