Better World
Schneider Electric LC1D Series Contactor, 110 V ac Coil, 3-Pole, 40 A, 18.5 kW, 3NO, 690 V ac
- RS-stocknr.:
- 665-8015
- Fabrikantnummer:
- LC1D40AF7
- Fabrikant:
- Schneider Electric
9 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 165,49
(excl. BTW)
€ 200,24
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 165,49 |
Better World
Ons Better World assortiment bevat producten die het u gemakkelijk maken om een groenere productkeuze te maken waarop u kunt vertrouwen. Klik hier voor meer informatie.
- RS-stocknr.:
- 665-8015
- Fabrikantnummer:
- LC1D40AF7
- Fabrikant:
- Schneider Electric
Wetgeving en conformiteit
- Land van herkomst:
- ID
Productomschrijving
Schneider Electric LC1D TeSys D Contactors
TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.
Features and Benefits
Built-in auxiliary contacts for added switching capability
Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
Can be panel mounted with screws or DIN Rail mounted
Bidirectional peak limiting diode suppressor to protect the coil
Easily installed accessories
Flexible control circuit to suit a wide range of applications
Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
Can be panel mounted with screws or DIN Rail mounted
Bidirectional peak limiting diode suppressor to protect the coil
Easily installed accessories
Flexible control circuit to suit a wide range of applications
What does the utilisation category AC1 and AC3 mean for the TeSys contactors?
Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.
- AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
- AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.
What accessories are available?
Auxiliary contact blocks with serrated wiping action
Front mount dust tight auxiliary contact blocks
Pneumatic time delay blocks
Transient voltage surge suppressors
Interface modules and electronic timers
Mechanical latching blocks
Front mount dust tight auxiliary contact blocks
Pneumatic time delay blocks
Transient voltage surge suppressors
Interface modules and electronic timers
Mechanical latching blocks
Is the TeSys D range a double break pole type contactor?
Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.
Schneider Electric Contactor, DIN Rail Mounting, 5.4W Maximum Power Loss Per Pole - TeSys D Series - LC1D40AF7
Snap your industrial gear to attention with this contactor from Schneider Electric. With its 40A current rating, you can trust it to close and open standard circuits with the flick of a switch. Don't worry about monitoring the device, as its built-in auxiliary contacts notify your controller when it switches to keep you updated. Rapid response times between just 4 and 26ms let you count on the unit to manage demanding hardware. As it clips straight onto a DIN rail, getting set up is speedy, without the hassle of special tools.
Features & Benefits
• Has three poles to support single-phase and three-phase voltages, so it's suitable for virtually any power supply
• Front cover protects sensitive switching elements against knocks and scratches
• Narrow body measurements of 55 (W) x 122 (H) x 120mm (D) mean it fits onto hard-working rails
• Lasts for around six million mechanical cycles, cutting the need for replacements
• Front cover protects sensitive switching elements against knocks and scratches
• Narrow body measurements of 55 (W) x 122 (H) x 120mm (D) mean it fits onto hard-working rails
• Lasts for around six million mechanical cycles, cutting the need for replacements
Applications
• Automotive industry
• Packing plants
• Chemical processing
• Packing plants
• Chemical processing
Can I use this contactor in extreme temperatures?
Yes, this product operates in temperatures between -5°C and +60°C, so it's tough enough to handle harsh conditions.
Approvals
UL, GOST, CSA, CCC.
Standards
CSA C22.2 No 14, EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508, IEC 60335-1.
Specificaties
Kenmerk | Waarde |
---|---|
Coil Voltage | 110 V ac |
Number of Poles | 3 |
Contact Voltage Rating | 690 V ac |
Contact Current Rating | 40 A |
Power Rating | 18.5 kW |
Series | LC1D |
Range | TeSys D |
Normal State Configuration | 3NO |
Auxiliary Contact Configuration | 1NO + 1NC |
Number Of Auxiliary Contacts | 2 |
Terminal Type | Everlink |
Width | 55mm |
Length | 122mm |
Depth | 120mm |
Better World Verification | Green Premium |
Better World Product | Yes |
Maximum Operating Temperature | +60°C |
Control Voltage | 110 V ac |
Mounting Style | Plate, Rail |
Minimum Operating Temperature | -5°C |