Schneider Electric Control Relay 3NO/2NC, 10 A

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Schneider Electric | TeSys D Series | Control Relays

Featuring a new design, the TeSys D series of contactors are simple and fast to set up in all automation applications. Compliant with international standards these relays maintain a compact size of 45 to 55mm (40 to 65A). Assuring a permanent tightening quality even in the event of conductor creep, all versions are equipped with EverLink which is a new patented technology. Each relay is also as standard 10A with 5 poles, suitable for AC or DC control. A version is also available with low consumption and built in suppression.

What is EverLink technology?
A removable terminal block, contactors and circuit-breakers can be linked without and accessory, vertically. On the same rail wiring can be connected in less than a minute. Reducing heat loss at connection points and without creep this technology provides quality wiring, continuity of service, fast assembly and reduced dimensions.

Features and Benefits:

• Thermal contacts 10A with operation down to 17V 5mA
• AC and DC Control circuits available
• Low-consumption DC and silent
• Variety of auxiliary contacts, and timer modules
• 5 pole
• Resistance to vibration & temperature cycling
• Rated impulse withstands voltage 6 kV conforming to IEC 60947

Protection ratings & Safety features:

• BS 4794, EN 60947-5, IEC 60947-5-1, NF C 63-140 and VDE 0660 standards
• CSA and UL certification
• IP2x protection front face conforming to VDE 0106
• TH conforming to IEC 60068

Applications - Used to create motor starters for any type of application and integration in control systems. Other applications include:
• Switching contactor or relay coils
• Powering control and signalling equipment
• Simple control systems
• Industry, infrastructure, and building

Note

For typical auxiliary contact blocks see stock number 394-9970

Specificaties
Kenmerk Waarde
Contact Current Rating 10 A
Range TeSys
Contact Voltage Rating 690 V dc
Series CAD3
Normal State Configuration 3NO/2NC
Terminal Type Screw
Width 45mm
Length 99mm
Depth 95mm
Minimum Operating Temperature -5°C
Operating Temperature Range -5 → +60 °C
Maximum Operating Temperature +60°C
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
74,10
(excl. BTW)
89,66
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
74,10 €
10 - 14
71,10 €
15 +
69,14 €
Related Products
Standards: BS5424 Part 1/IEC947, VDE 0660, NFC63 110. ...
Description:
Standards: BS5424 Part 1/IEC947, VDE 0660, NFC63 110. The GV2 series offers short circuit and overload protection in built within one deviceCan be used for disconnectionSingle phase sensitivityBuilt and tested to IEC947, EN60947Lockable in the off positionAuxiliaries are available to ...
Signalling Contacts for use with the TeSys U ...
Description:
Signalling Contacts for use with the TeSys U range to help identify faults in the systems. Faster design with fewer components neededQuicker panel build with faster assembly time and fewer wires per starterSpace saving 45mm width up to 32A (even ...
Protects motor against overload and phase lossTrip class ...
Description:
Protects motor against overload and phase lossTrip class 10Auxiliary switch 1N/O and 1N/CStable, shock-resistant direct mounting on 100-K contactorBuilt in trip contact 95//96 and signal contact 97//98Auto/manual reset selectable on devicevisible trip indicationTest/trip actuatorStop actuator.
Professional range of WEG contactors from the CWC ...
Description:
Professional range of WEG contactors from the CWC Series designed for switching of electric motors. The contactors are modular and compact but at the same time robust and highly reliable. Built and tested according to IEC/EN60947 and DIN VDE 0660. ...