Schneider Electric Control Relay 3NO/2NC, 10 A

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Schneider Electric | TeSys D Series | Control Relays

Featuring a new design, the TeSys D series of contactors are simple and fast to set up in all automation applications. Compliant with international standards these relays maintain a compact size of 45 to 55mm (40 to 65A). Assuring a permanent tightening quality even in the event of conductor creep, all versions are equipped with EverLink which is a new patented technology. Each relay is also as standard 10A with 5 poles, suitable for AC or DC control. A version is also available with low consumption and built in suppression.

What is EverLink technology?
A removable terminal block, contactors and circuit-breakers can be linked without and accessory, vertically. On the same rail wiring can be connected in less than a minute. Reducing heat loss at connection points and without creep this technology provides quality wiring, continuity of service, fast assembly and reduced dimensions.

Features and Benefits:

• Thermal contacts 10A with operation down to 17V 5mA
• AC and DC Control circuits available
• Low-consumption DC and silent
• Variety of auxiliary contacts, and timer modules
• 5 pole
• Resistance to vibration & temperature cycling
• Rated impulse withstands voltage 6 kV conforming to IEC 60947

Protection ratings & Safety features:

• BS 4794, EN 60947-5, IEC 60947-5-1, NF C 63-140 and VDE 0660 standards
• CSA and UL certification
• IP2x protection front face conforming to VDE 0106
• TH conforming to IEC 60068

Applications - Used to create motor starters for any type of application and integration in control systems. Other applications include:
• Switching contactor or relay coils
• Powering control and signalling equipment
• Simple control systems
• Industry, infrastructure, and building

Note

For typical auxiliary contact blocks see stock number 394-9970

Specificaties
Kenmerk Waarde
Contact Current Rating 10 A
Range TeSys
Contact Voltage Rating 690 V dc
Series CAD3
Normal State Configuration 3NO/2NC
Terminal Type Screw
Depth 95mm
Width 45mm
Length 99mm
Operating Temperature Range -5 → +60 °C
Minimum Operating Temperature -5°C
Maximum Operating Temperature +60°C
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
11 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
63,00
(excl. BTW)
76,23
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
63,00 €
10 - 14
60,44 €
15 +
57,82 €
Related Products
Consistent connection tightnessPower consumption for Vac types 4.5 ...
Description:
Consistent connection tightnessPower consumption for Vac types 4.5 VAPower consumption for Vdc types 2.4 WCurrent rating 10A Ith Resistance to vibration & temperature cyclingDin or screw fixingIdeal for use with GV2-M motor circuit breakers.
For use with PLC output. Has LED indicator ...
Description:
For use with PLC output. Has LED indicator and supression incorporated (1.8W) and wide range coil 0.7 - 1.3 x rated. voltage. Utilisation category AC-1= 20AScrew clamp connectionDimensions (H x W x D) 58 x 45 x 57mm.
Climate-proof, finger safe contactor relays. RC elements, varistors, ...
Description:
Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil. Size S00High degree if contact stability ...
The 3RT Range of Siemens Contactors. All models ...
Description:
The 3RT Range of Siemens Contactors. All models are highly reliable and extremely good quality. Screw ConnectionAll models vary with Current rating and Voltage.Various NO/NC Values.