Schneider Electric Control Relay 5NO, 10 A

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: FR
Productomschrijving

Schneider Electric | TeSys D Series | Control Relays

Featuring a new design, the TeSys D series of contactors are simple and fast to set up in all automation applications. Compliant with international standards these relays maintain a compact size of 45 to 55mm (40 to 65A). Assuring a permanent tightening quality even in the event of conductor creep, all versions are equipped with EverLink which is a new patented technology. Each relay is also as standard 10A with 5 poles, suitable for AC or DC control. A version is also available with low consumption and built in suppression.

What is EverLink technology?
A removable terminal block, contactors and circuit-breakers can be linked without and accessory, vertically. On the same rail wiring can be connected in less than a minute. Reducing heat loss at connection points and without creep this technology provides quality wiring, continuity of service, fast assembly and reduced dimensions.

Features and Benefits:

• Thermal contacts 10A with operation down to 17V 5mA
• AC and DC Control circuits available
• Low-consumption DC and silent
• Variety of auxiliary contacts, and timer modules
• 5 pole
• Resistance to vibration & temperature cycling
• Rated impulse withstands voltage 6 kV conforming to IEC 60947

Protection ratings & Safety features:

• BS 4794, EN 60947-5, IEC 60947-5-1, NF C 63-140 and VDE 0660 standards
• CSA and UL certification
• IP2x protection front face conforming to VDE 0106
• TH conforming to IEC 60068

Applications - Used to create motor starters for any type of application and integration in control systems. Other applications include:
• Switching contactor or relay coils
• Powering control and signalling equipment
• Simple control systems
• Industry, infrastructure, and building

Note

For typical auxiliary contact blocks see stock number 394-9970

Specificaties
Kenmerk Waarde
Contact Current Rating 10 A
Range TeSys
Contact Voltage Rating 690 V ac
Series CAD5
Normal State Configuration 5NO
Terminal Type Screw
Depth 95mm
Width 45mm
Length 99mm
Operating Temperature Range -5 → +60 °C
Minimum Operating Temperature -5°C
Maximum Operating Temperature +60°C
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
13 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
74,10
(excl. BTW)
89,66
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
74,10 €
10 - 14
71,10 €
15 +
68,00 €
Related Products
Consistent connection tightnessPower consumption for Vac types 4.5 ...
Description:
Consistent connection tightnessPower consumption for Vac types 4.5 VAPower consumption for Vdc types 2.4 WCurrent rating 10A Ith Resistance to vibration & temperature cyclingDin or screw fixingIdeal for use with GV2-M motor circuit breakers.
For use with PLC output. Has LED indicator ...
Description:
For use with PLC output. Has LED indicator and supression incorporated (1.8W) and wide range coil 0.7 - 1.3 x rated. voltage. Utilisation category AC-1= 20AScrew clamp connectionDimensions (H x W x D) 58 x 45 x 57mm.
The 3RT Range of Siemens Contactors. All models ...
Description:
The 3RT Range of Siemens Contactors. All models are highly reliable and extremely good quality. Screw ConnectionAll models vary with Current rating and Voltage.Various NO/NC Values.
K series auxiliary mini-contactors for dc or ac ...
Description:
K series auxiliary mini-contactors for dc or ac control circuits.