Schneider Electric Overload Relay NO/NC, 100 VA, 115 V ac, 230 V ac

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: FR
Productomschrijving

Schneider Electric LT3-S Range

Can be used with all motors equipped with PTC thermistor probes. It monitors windings temperature and ensures that the rated operating value is not exceeded, therefore guarding against faults which are often the cause of premature ageing. They can also be used to monitor surface temperature.

Automatic or manual reset
Remote reset
Fault storage with the supply switched off
Fault indication
Test function

Specificaties
Kenmerk Waarde
Control Voltage 115 V ac, 230 V ac
Range TeSys
Contact Voltage Rating 250 V ac
Series LT3S
Normal State Configuration NO/NC
Number Of Auxiliary Contacts 2
Power Rating 100 VA
Terminal Type Cage Clamp
Reset Method Manual
Width 22.5mm
Length 100mm
Depth 100mm
Operating Temperature Range -25 → +60 °C
Maximum Operating Temperature +60°C
Minimum Operating Temperature -25°C
9 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
253,09
(excl. BTW)
306,24
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
253,09 €
10 - 14
246,06 €
15 +
239,41 €
Related Products
The 3RB2 range of Solid State Electronic overloads ...
Description:
The 3RB2 range of Solid State Electronic overloads can be connected directly to Siemens SIRIUS contactors to provide accurate motor overload protection with enhanced single phase sensitivity,Application: Protection of 3 phase AC motors in sinusoidal 50/60Hz network. These relays are ...
Type RF38, phase failure sensitive, manual or automatic ...
Description:
Type RF38, phase failure sensitive, manual or automatic resettingType RFN38, non phase failure sensitive, manual or automatic resettingType RF82 and RF95, phase failure sensitive, manual resettingType RFA82 and RFA95, phase failure sensitive, automatic resettingType RFN82 and RFN95, non phase failure ...
Provide protection to motors or other machines which ...
Description:
Provide protection to motors or other machines which require the temperature of their windings to be monitored and not exceeded, otherwise serious damage may occur. a.c. or d.c. operating voltagesRated current; 6ADIN rail mountingCan be screw mounted using adaptor (stock ...
Range of TeSys thermal relays for motor protection.Compensated, ...
Description:
Range of TeSys thermal relays for motor protection.Compensated, with automatic or manual reset, and trigger display.Equipped with test function.To be mounted on LC1 type contactors from the TeSys range.No direct fitting on old contactors (add panel ) for refs. LRD01 ...