Schneider Electric Control Relay 2NO/2NC, 10 A

Wetgeving en conformiteit
Land van herkomst: FR

Schneider Electric | TeSys K Series | Control Relays

Creating seamless integration in all automation applications, compactness ratio and high performance, the TeSys K series is a range of reversing or non-reversing contactors. All 4 pole relays have 10A thermally rated contacts which are suitable for AC or DC control voltages. In addition the series also features low consumption coil versions with built in suppression which are suitable to be used with programmable controllers.

Features and Benefits:

• Common options available for all 6, 9, 12 A ratings
• AC and DC Control circuits available
• Low-consumption DC and silent
• Variety of auxiliary contacts, and timer modules
• Clamp terminals as standard with spring terminal, printed circuit board connection and fast-on connector types available
• Consistent connection tightness
• Power consumption for Vac types 4.5 VA
• Power consumption for Vdc types 2.4 W
• Resistance to vibration & temperature cycling
• Din or screw fixing

Protection ratings & Safety features:

• BS 5424, IEC 60947, NF C 63-140 and VDE 0660 standards
• CSA and UL certification
• IP2x protection
• TC conforming to IEC 60068

Applications - Ideal for Zones sensitive to noise, disturbed mains supplies, industry, building and infrastructure. Other applications include:
• Switching contactor or relay coils
• Powering control and signalling equipment
• Simple control systems


Relays are positively guided.

Kenmerk Waarde
Contact Current Rating 10 A
Range TeSys K
Contact Voltage Rating 690 V ac
Mounting Style DIN Rail Mount, Screw Mount
Series CA2KN
Normal State Configuration 2NO/2NC
Terminal Type Screw
Width 45mm
Length 58mm
Depth 57mm
Minimum Operating Temperature -25°C
Operating Temperature Range -25 → +50 °C
Maximum Operating Temperature +50°C
54 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
32,00 €
10 - 14
30,69 €
15 +
29,37 €
Related Products
For direct mounting beneath the 1, 3 or ...
For direct mounting beneath the 1, 3 or 4 pole F range contactors Class 10 current rating (conforming to EN 60947-4-1)For suitable contactors see stock no's 827-142, 827-164 & 827-158 typically.
Standards: BS5424 Part 1/IEC947, VDE 0660, NFC63 110. ...
Standards: BS5424 Part 1/IEC947, VDE 0660, NFC63 110. The GV2 series offers short circuit and overload protection in built within one deviceCan be used for disconnectionSingle phase sensitivityBuilt and tested to IEC947, EN60947Lockable in the off positionAuxiliaries are available to ...
On coil energisation the mechanical latch is engaged ...
On coil energisation the mechanical latch is engaged & holds the armature closed.This feature enables the contactors state to be maintained when re-starting after an interrupted cycle & allows power consumption reduction by enabling de-energisation of the contactor coil. Remotely ...
The TeSys U is a modular system for ...
The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection ...