Eaton Overload Relay NO/NC, 12 → 16 A, 16 A, 6 W, 500 V ac

  • RS-stocknr. 152-417
  • Fabrikantnummer 290168 | ZB12-16
  • Fabrikant Eaton
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

ZB Overload Relays

Protects the motor against phase failure or overload
Short circuit protection when fitted directly to a contact
Suitable for protection of Atex motors
Single phase sensitivity to IEC/EN 60947
When fitting overload relay remote from contactor or using more than one overload relay, use remote mounting base (stock no. 493-0488- ZB32 only)

Note

ZB12 have 5 pins, ZB32 have 4 pins.

Specificaties
Kenmerk Waarde
FLC Motor Rating 12 → 16 A
Control Voltage 500 V ac
Contact Current Rating 16 A
Contact Voltage Rating 690 V ac
Mounting Style Direct Contactor
Series ZB
Normal State Configuration NO/NC
Number Of Auxiliary Contacts 2
Power Rating 6 W
Terminal Type Screw
Reset Method Automatic, Manual
Width 45mm
Length 120mm
Depth 88mm
Operating Temperature Range -5 → +55 °C
Maximum Operating Temperature +55°C
Minimum Operating Temperature -5°C
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
9 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
Was 54,00 €
46,40
(excl. BTW)
56,14
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
46,40 €
10 - 14
44,52 €
15 +
42,59 €
Related Products
Mechanical ResetVertical mouting106 x 45 x 58mm (H ...
Description:
Mechanical ResetVertical mouting106 x 45 x 58mm (H x W x D)Ingress protection to IP65Overload relays only for the discontinued 4kW (AC3) D.O.L starter.
Protects motor against overload and phase lossTrip class ...
Description:
Protects motor against overload and phase lossTrip class 10Auxiliary switch 1N/O and 1N/CStable, shock-resistant direct mounting on 100-K contactorBuilt in trip contact 95//96 and signal contact 97//98Auto/manual reset selectable on devicevisible trip indicationTest/trip actuatorStop actuator.
The Eaton Contactors relays or Low-voltage industrial components ...
Description:
The Eaton Contactors relays or Low-voltage industrial components with a screw terminal connection technique works on AC operational voltage and works on 24V actuating voltage and also has 3 normal opening contacts. 55°C maximum operating ambient temperature -25°C minimum operating ...
One N/O and one N/C auxiliary contactTrip class ...
Description:
One N/O and one N/C auxiliary contactTrip class 10AManual/auto reset80 x 44 x 94mm (H x W x D) (4 to 11kW) Vertical mountingFor use with A series contactors4 to 11 kW for contactor series A9 to A30.