ENCLOSURE,MOULDED PLASTIC, IP55

  • RS-stocknr. 755-2836
  • Fabrikantnummer 3RV1913-1DA00
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: AU
Productomschrijving

SIRIUS 3RV1 Enclosures

A Siemens range of enclosures, equipped with N and PE/ground terminals, for installing circuit breakers as a single unit. There are two knock-out cable entries for cable glands at the top and two at the bottom of the enclosure, with scored cable entries at the rear. A knock-out on the top of the enclosure is provided for indicator lights.

Equipped with N and PE/ground terminals
Two knock-outs at top and bottom, with scored cable entries at the rear
Moulded plastic or aluminium, flush or wall mounted

Siemens SIRIUS Cage Clamp Technology

As an alternative to screw connections a large number of Siemens low voltage components are also available with cage clamp connections.,Solid, stranded and finely stranded conductors, with or without end sleeves, can be connected, where two conductors can be clamped independent of one another at each terminal.,Inserting a flat bladed screwdriver opens the terminal; the conductor is then introduced and securely clamped following the removal of the screwdriver. The chromium-nickel spring steel of the cage clamp terminal guarantees corrosion resistant contact of the conductors.

Advantages

Time saving: the connection can be made quickly without having to press on end sleeves
Reliability: the terminal connection is resistant to shock and vibration
Vertical Mounting
Reduced maintenance: the cage clamp system means that the checking of screw connections following transportation is unnecessary

4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
22,10
(excl. BTW)
26,74
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
22,10 €
10 - 14
21,41 €
15 +
20,67 €
Related Products
Steel enclosure to BS EN 60439-3Colour RAL 7035Supplied ...
Description:
Steel enclosure to BS EN 60439-3Colour RAL 7035Supplied factory fitted with RCDsComplete with shrouded busbar, terminal bars and installation instructionsHinged padlockable door (Padlock not supplied).
Electrical enclosures designed to house Hypra panel bases.With ...
Description:
Electrical enclosures designed to house Hypra panel bases.With supports for modular equipment.Protection index: IP44 → IP66 / 67-5 depending on the bases fitted.
Electrical enclosures designed to house Hypra panel bases.With ...
Description:
Electrical enclosures designed to house Hypra panel bases.With supports for modular equipment.
MK Sentry introduce a new range of Populated ...
Description:
MK Sentry introduce a new range of Populated Consumer Units. There are 3 new insulated surface mounted additions that come supplied pre fitted with switch Disconnector, RCDs, devices and necessary cabling. The populated units allow flexibility for protected and unprotected ...