3M 3341 Series, Jack Screw Mounting Kit for use with D-sub Connector

  • RS-stocknr. 120-8378
  • Fabrikantnummer 3341-1L
  • Fabrikant 3M
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Mounting Kits

These 3M Jack Screws are #4-40 UNC for both male and female (where applicable) threads.

3M jack screw kits containing 2 of each item (S=short or L=long hex heads)
For coupling IDC cable mount D connectors to corresponding panel mounting connectors
3505-62 (50-way latching bracket) enables rapid connection/disconnection of 50-way metal backshell stock no. 163-1605

Note

Screw kits are supplied in packs of 2 (price quoted is for 2), except stock no. 448-5584 where packs contain two long (19mm) and two (10mm) screws. See ’dimensions’ table for screw types and lengths. For type 3342-3 see stock no. 448-5584 . For bulk packs of 3341-1L and 3341-S see stock numbers 749-4702 and 749-4711 respectively.

All products adhere to the following specification, with exceptions as noted below.  
Body material: Glass filled polyester (PBT)
Flammability: UL94V-0
Contact material/plating  
Beryllium copper Plating
Class II sockets 0.76μm gold
Cable plugs 0.76μm gold
’D’ connectors 0.76μm gold
Board mount sockets 0.3μm gold
   
Phosphor bronze  
Class III sockets 0.38μm gold
Class II headers 0.76μm gold
Class III headers 0.38μm gold
Transition connectors Tin plated
   
Insulation resistance: 1´109 ohms min. at 500Vdc
Current rating: 1A (headers 2A)
Withstanding voltage 1000V r.m.s.
Temperature range: -55°C to +105°C
   
Performance level:  
Class II 200 mating cycles
Class III 50 mating cycles
Note: 'D' type connectors include steel shells. Latches for Class III headers are of nylon.  
Specificaties
Kenmerk Waarde
Type Jack Screw Mounting Kit
Overall Length 12.7mm
For Use With D-Sub Connector
Series 3341
183 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
736 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
2,12
(excl. BTW)
2,57
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
2,12 €
25 - 74
1,82 €
75 - 199
1,74 €
200 - 399
1,63 €
400 +
1,50 €
Related Products
The Birtcher Products range of PCB-Retainers have been ...
Description:
The Birtcher Products range of PCB-Retainers have been designed primarily for use in sheet metal applications and feature a low-cost sprint action card retainer design. The PCB retainers provide outstanding protection against harsh environments, moderate shock and vibration. Low-cost sprint ...
The Birtcher Products range of Lok-Retainers have been ...
Description:
The Birtcher Products range of Lok-Retainers have been professionally designed to retain printed circuit board in harsh environments, moderate shock and vibration. The highly economical range of Lok-tainers offer a rugged, compact finish and provide outstanding protection in both sheet ...
From Deutsch, this plastic panel nut is for ...
Description:
From Deutsch, this plastic panel nut is for use with the HDP20 range of connectors. Sealed to IP67Durable – 100 mating cycles minimumVibration proof – 20g's at 10 - 2000HzCorrosion Resistant – 48hours Salt Spray to MIL STD 1344.
DH Series is an impedance controlled interface connector ...
Description:
DH Series is an impedance controlled interface connector for high speed transmission. It has a 1mm contact mating pitch. This, coupled with a 0.5mm mounting pitch, makes for a more compact, lower-profile, higher-density alternative to conventional half-pitch interface connectors. Depending ...