FlexLink Beam Mount Plate, strut profile 30 mm, 60 mm, Groove Size 7.2mm

  • RS-stocknr. 289-9234
  • Fabrikantnummer XFFB 30
  • Fabrikant FlexLink
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: SE
Productomschrijving

Mounting Plate XC, XF and XD

To connect beams end to beam side. The holes in the end of the beam must be deburred and threaded (M5 rolled). Use a countersunk screw to attach the plate to the beam end then secure to the T-slot of the beam side.

Note

Fixings not included

//media.rs-online.com/t_line/L2490405-01.gif
//media.rs-online.com/t_line/LD249040-01.gif
//media.rs-online.com/t_line/LF249040-89.gif
Specificaties
Kenmerk Waarde
Structural Element Type Beam
Connector Type Mounting Plate
Fits Groove Size 7.2mm
Thread Size M6
Fits Strut Profile 30 mm, 60 mm
Product Family FlexLink
Material Aluminium
Product System XF
18 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
20 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
13,92
(excl. BTW)
16,84
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
13,92 €
5 - 9
13,50 €
10 +
13,05 €
Related Products
Slot nuts can be inserted directly into the ...
Description:
Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.
Enables enclosure beam ends to be connected to ...
Description:
Enables enclosure beam ends to be connected to beam sides. XD to XD, XD to XC and XF to XF,The connector is mounted directly onto the beam end with the M5 self-tapping screw.,When the connector is being fitted to the ...
For building connections or stays of optional length ...
Description:
For building connections or stays of optional length and angle.,Will connect to all XC beam sides, or 44 mm square beam ends which accept M8 threads.,Each bracket requires two M8 x 12 screws see stock no. 527-482, and two M8T-slot ...
For building stable and neat framework corners.The beams ...
Description:
For building stable and neat framework corners.The beams must be cut accurately (45° for a 90°corner, and 22.5° for a 45° corner).Corner fittings can be placed into the T-slots and clamped against the slot with the set screws provided.