FlexLink Beam Adjustable Bracket, strut profile 44 mm, 88 mm, Groove Size 11mm

  • RS-stocknr. 261-2138
  • Fabrikantnummer XCFJ 44 F
  • Fabrikant FlexLink
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: SE
Productomschrijving

Adjustable Stay Brackets XC

For building connections or stays of optional length and angle.,Will connect to all XC beam sides, or 44 mm square beam ends which accept M8 threads.,Each bracket requires two M8 x 12 screws see stock no. 527-482, and two M8T-slot nuts see stock no. 331-4289 for fixing beam sides, or 2 off M8 x 25 screws see stock no. 527-511 for fixing beams to ends.

Note

Fixings not included

//media.rs-online.com/t_line/L261213-01.gif
//media.rs-online.com/t_line/LF261213-10.gif
Specificaties
Kenmerk Waarde
Structural Element Type Beam
Connector Type Adjustable Bracket
Fits Groove Size 11mm
Thread Size M6
Fits Strut Profile 44 mm, 88 mm
Product Family FlexLink
Material Die Cast Zinc
Product System XC
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
26,77
(excl. BTW)
32,39
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
26,77 €
5 - 9
25,94 €
10 +
25,10 €
Related Products
Offers high vibration resistance and a neat flush ...
Description:
Offers high vibration resistance and a neat flush finish to connect beam ends to beam side.Through hole of 12.2mm must be drilled near the beam end to accept the yoke, use drill fixture stock-no. 326-5519.,To tighten the yoke, use a ...
Suitable for simple door functions, The T-slot rotatable ...
Description:
Suitable for simple door functions, The T-slot rotatable location lugs can be removed if the hinge is to be fixed to a flat surface. Hole centres 50mm,Fasteners not included. Each hinge requires:. Qty 2 M6´12 socket screws see stock no. ...
Multi-blocks are a versatile connector for fastening sheet ...
Description:
Multi-blocks are a versatile connector for fastening sheet material to the aluminium beams. The multi-block is inserted into the beam T-slot and fixed by turning through 90 degrees.A square nut is included, XC and XF M6, XD M5 for mounting ...
Slot nuts can be inserted directly into the ...
Description:
Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.