FlexLink Beam Hinge, strut profile 44 mm, 88 mm, Groove Size 11mm

  • RS-stocknr. 248-9815
  • Fabrikantnummer XCAH 50
  • Fabrikant FlexLink
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: SE
Productomschrijving

Polyamide Hinge XC

Suitable for simple door functions, The T-slot rotatable location lugs can be removed if the hinge is to be fixed to a flat surface. Hole centres 50mm,Fasteners not included. Each hinge requires:

Qty 2 M6´12 socket screws see stock no. 483-9650
Qty 2 M6 slot nuts see stock no. 248-9843

Specificaties
Kenmerk Waarde
Structural Element Type Beam
Connector Type Hinge
Fits Groove Size 11mm
Thread Size M6
Fits Strut Profile 44 mm, 88 mm
Product Family FlexLink
Material Polyamide
Product System XC
11 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
12,21
(excl. BTW)
14,77
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
12,21 €
5 - 9
11,85 €
10 +
11,45 €
Related Products
Offers high vibration resistance and a neat flush ...
Description:
Offers high vibration resistance and a neat flush finish to connect beam ends to beam side.Through hole of 12.2mm must be drilled near the beam end to accept the yoke, use drill fixture stock-no. 326-5519.,To tighten the yoke, use a ...
Slot nuts can be inserted directly into the ...
Description:
Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.
Enables enclosure beam ends to be connected to ...
Description:
Enables enclosure beam ends to be connected to beam sides. XD to XD, XD to XC and XF to XF,The connector is mounted directly onto the beam end with the M5 self-tapping screw.,When the connector is being fitted to the ...
For building connections or stays of optional length ...
Description:
For building connections or stays of optional length and angle.,Will connect to all XC beam sides, or 44 mm square beam ends which accept M8 threads.,Each bracket requires two M8 x 12 screws see stock no. 527-482, and two M8T-slot ...