- RS-stocknr.:
- 499-299
- Fabrikantnummer:
- 4450112
- Fabrikant:
- EXACT
12 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 20,94
(excl. BTW)
€ 25,34
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 20,94 |
- RS-stocknr.:
- 499-299
- Fabrikantnummer:
- 4450112
- Fabrikant:
- EXACT
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- DE
Productomschrijving
Sheet metal hole cutter, straight tap, HSS TiAlN
HSS TiAlN-coated hole cutter for particularly hard materials; glides easily and not prone to wear
For burr-free drilling and planing sheet metal, pipes and profiles
Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastic and wood up to 5 mm thick
Crosswise grinding, no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
For burr-free drilling and planing sheet metal, pipes and profiles
Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastic and wood up to 5 mm thick
Crosswise grinding, no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
Warning
Not suitable for aluminium. Use without cooling agents.
Specificaties
Kenmerk | Waarde |
---|---|
Drill Bit Type | Cone Cutter |
Material | HSS |
Minimum Head Size | 4mm |
Maximum Head Size | 20mm |