RS PRO Silver Conductive Adhesive Epoxy, 10 g Vial

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Silver Loaded Conductive Epoxy Adhesive

The silver loaded, conductive epoxy from RS PRO is a two-part thermosetting material with an epoxy resin adhesive base which contains silver flakes. This 2-element epoxy adhesive features high conductive benefits and is ideal for interconnecting and mechanical bonding components to circuits. Using Conductive Epoxy Adhesive can be a safer and more efficient alternative to traditional soldering. Silver-based conductive epoxies are much more oxidise resistant than tin or lid. Unlike tin or lid, they remain conductive even when oxidised. It eliminates the risk of serious conductive issues.

Features and Benefits:

• Hard and wear resistant after proper curing
• Compatible with a wide range of materials
• Suitable for substrates that cannot be soldered
• Superior durability, thermal, shock and chemical resistance
• High electrical conductivity
• The resin to hardener mix ratio: 1:1 by weight or volume
• Full instructions supplied
• Non-toxical substances eliminate the need for wearing a solder mask during application
• No pre or post clean is required

Typical Applications:

Silver-based conductive epoxies are widely used for interconnecting and mechanical bonding components to circuits due to excellent electrical conductivity. They are also suitable for use with most plastics, ceramics, wood, metal, glass and graphite as an excellent glue.

Typical applications: as a replacement for soldered/brazed joints where the temperature is a consideration, and as a thermally conductive adhesive.

Specificaties
Kenmerk Waarde
Product Type Epoxy
Conductive Element Silver
Package Type Vial
Package Size 10 g
Cure Time 36 h
Minimum Operating Temperature -55°C
Special Features Thermally Conductive
Operating Temperature Range -55 → +150 °C
Odour Mild Amine-like
Maximum Operating Temperature +150°C
Chemical Composition Silver, 3, 6-Diazaoctanethylenediamin
Thermal Conductivity 11W/mK
Physical Form Liquid
Specific Gravity 2.85
26 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
110,94
(excl. BTW)
134,24
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
110,94 €
6 - 14
106,48 €
15 +
104,27 €
Related Products
Can be used to create a thin, smooth, ...
Description:
Can be used to create a thin, smooth, flexible and adherent film which has a high electrical conductivity. For use in repairing electrical circuits on PCB track or heated rear windscreens, screening plastic housings against high frequency fields, earthing strips, ...
The Chemtronics 3g carbon conductive adhesive repair kit ...
Description:
The Chemtronics 3g carbon conductive adhesive repair kit permanently repairs rubber keypads by restoring conductivity to worn, intermittent and non-conductive carbon contacts. This product easily returns rubber keypads to like-new condition. The rubber keypad repair kit provides a silver/carbon coating ...
Micro-tip pen for drawing conductive traces on flexible ...
Description:
Micro-tip pen for drawing conductive traces on flexible and ITO surfaces. Quickly creates flexible conductive silver traces on flex circuitryMicro tip for precise applicationsDries in minutes at room temperatureHighly adherent silver-based polymer systemRepairs conductive traces on flexible circuits and indium ...
The pen dispenser for economically drawing conductive traces, ...
Description:
The pen dispenser for economically drawing conductive traces, jumpers and shielding. Quickly creates conductive nickel traces on most surfacesEasy and economical to useValved pen tip for easy applicationsDries in minutes at room temperatureEconomically repairs traces, links components, and shields electronics. ...