Legris 15mm x 1/2 in BSPT Male Straight Coupler Brass Compression Fitting

  • RS-stocknr. 293-6709
  • Fabrikantnummer 0105 15 21
  • Fabrikant Legris
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Pneumatic Male Stud Coupling BSP Taper

In-line connection of tubing with male thread

Body material: Brass
Olive: Brass
Nut: Brass

Compression Fittings – Brass

Brass fittings for fluid distribution. Suitable for connecting steel, copper and nylon tubing. Applications include compressed air, hydrocarbon, water and lubrication.

Specificaties
Kenmerk Waarde
Compression Connection Pipe Diameter 15mm
Fitting Type Coupler
Material Brass
Threaded Connection 1/2 in BSPT Male
Fitting Direction Straight
Thread Size 1/2in
Thread Standard BSPT
Gender Male
140 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
7,274
(excl. BTW)
8,802
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
7,274 €
36,37 €
25 - 45
6,98 €
34,90 €
50 - 120
6,824 €
34,12 €
125 +
6,676 €
33,38 €
*prijsindicatie
Related Products
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessoriesSuitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many ...
Brass fittings for fluid distribution. Suitable for connecting ...
Description:
Brass fittings for fluid distribution. Suitable for connecting steel, copper and nylon tubing. Applications include compressed air, hydrocarbon, water and lubrication.
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...