Legris 4mm Straight Equal End Coupler Brass Compression Fitting

  • RS-stocknr. 439-903
  • Fabrikantnummer 0106 04 00
  • Fabrikant Legris
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Equal Straight Coupling

Compression Fittings – Brass

Brass fittings for fluid distribution. Suitable for connecting steel, copper and nylon tubing. Applications include compressed air, hydrocarbon, water and lubrication.

Specificaties
Kenmerk Waarde
Compression Connection Pipe Diameter 4mm
Fitting Type Equal End Coupler
Material Brass
Fitting Direction Straight
40 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
15 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
2,91
(excl. BTW)
3,52
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
2,91 €
14,55 €
25 - 45
2,794 €
13,97 €
50 - 120
2,73 €
13,65 €
125 +
2,67 €
13,35 €
*prijsindicatie
Related Products
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...