Leap Leaper-2 IC Tester IC 16 Char x 1 Row, LCD, Model Leaper-2

  • RS-stocknr. 771-8562
  • Fabrikantnummer Leaper-2
  • Fabrikant Leap
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Leaper-2 Portable linear/analogue IC tester

LEAPER-2 is a portable, small and light Linear IC Tester that provides auto detection function.

Easy-operating, particularly designed for the linear IC
Small, portable, light and power-saving, usable with batteries
Average test time: 0.8 second
Equipped with empty-load test, and Auto Power Off function
Auto identify the unknown ICs and list the P/N of the IC which has same function

Contents

Main unit
User manual
DC 9V/500mA power adaptor

Specificaties
Kenmerk Waarde
Tester Type IC
Display Type LCD, 16 Char x 1 Row
Battery Type 9V
Power Source Battery
Dimensions 160 x 110 x 45mm
Weight 340g
Height 45mm
Length 160mm
Maximum Operating Temperature +45°C
Model Number p Leaper-2
Minimum Operating Temperature +5°C
Width 110mm
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
411,95
(excl. BTW)
498,46
(incl. BTW)
Aantal stuks
Per stuk
1 - 1
411,95 €
2 +
398,08 €
Related Products
A low cost, battery powered component tester with ...
Description:
A low cost, battery powered component tester with a 3 digit LCD display and a maximum reading of 1999. Making it ideal for use in field service and production environments. Tests: Batteries, diodes, LEDs, transistors & SCRsMeasures resistance and capacitanceLow ...
RS SMD-100 has a changeable head for automatic ...
Description:
RS SMD-100 has a changeable head for automatic scan check DC/AC Voltage, components (resistance, capacitance, diode and continuity) and circuit fault. All inputs are protected according to EN 610101-1 CATIII 600V. Automatic DCV or ACV selection, Capacitance, Resistance, Continuity and ...
An intelligent component analyser (70 x 103 x ...
Description:
An intelligent component analyser (70 x 103 x 20mm) that can analyse a vast number of different component types including bipolar transistors, MOSFETs, thyristors, triacs, diodes, LEDs and others. It provides information such as component type, pin out and measurable ...
The Atlas SCR will identify the device type, ...
Description:
The Atlas SCR will identify the device type, display the pinout and measure gate sensitivity. Connect any way roundThyristor and Triac identificationAutomatic pinout identificationGate sensitivity checking from 100uA to 90mALoad current test up to 100mAShorted junction testingAuto power on and ...