STMicroelectronics, LM2903Q2T

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

This device consists of two independent low-power voltage comparators designed specifically to operate from a single supply over a wide range of voltages. Operation from split power supplies is also possible. In addition, the device has a unique characteristic in that the input common-mode voltage range includes the negative rail even though operated from a single power supply voltage.

Wide single supply voltage range or dual supplies +2 V to +36 V or ±1 V to ±18 V
Very low supply current (0.4 mA) independent of supply voltage (1 mW/comparator at +5 V)
Low input bias current: 25 nA typ.
Low input offset current: ±5 nA typ.
Input common-mode voltage range includes negative rail
Low output saturation voltage: 250 mV typ. (IO= 4 mA)
Differential input voltage range equal to the supply voltage
TTL, DTL, ECL, MOS, CMOS compatible outputs

Related products
See LM2903W for similar device with higher ESD performances
See LM2903H for similar device with operating temperature up to 150 °C

Specificaties
Kenmerk Waarde
Comparator Type Low Power
Mounting Type Surface Mount
Package Type DFN
Power Supply Type Dual, Single
Output Type CMOS, DTL, ECL, MOS, TTL
Number of Channels per Chip 2
Typical Response Time 1.3µs
Pin Count 8
Typical Single Supply Voltage 2 → 36 V
Dimensions 2.05 x 2.05 x 0.7mm
Length 2.05mm
Width 2.05mm
Height 0.7mm
Minimum Operating Temperature -40 °C
Typical Voltage Gain 200 V/mV
Typical Dual Supply Voltage ±1 to ±18V
Maximum Operating Temperature +125 °C
9000 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (On a Reel of 3000)
0,103
(excl. BTW)
0,125
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3000 - 6000
0,103 €
309,00 €
9000 - 21000
0,096 €
288,00 €
24000 - 42000
0,088 €
264,00 €
45000 +
0,085 €
255,00 €
*prijsindicatie