Terasic P0061 Cyclone IV Industrial Development Kit

  • RS-stocknr. 768-9032
  • Fabrikantnummer P0061
  • Fabrikant Terasic
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Cyclone IV Industrial Network Development Kit

The Industrial Networking Kit (INK) offers a comprehensive development platform for industrial communications and automation applications. The kit consists of the DE2-115 board featuring the Altera Cyclone® IV device and an Industrial Communications Board (ICB-HSMC) that supports RS-485, RS-232, CAN, and additional I/O expansion. The INK gives industrial equipment designers greater flexibility in implementing real-time Ethernet communications with the availability of Industrial Ethernet IP cores.

Cyclone IV EP4CE115 with 114480 logic elements, 3888kbits Embedded memory, 266 Embedded 18 x 18 multipliers, 4 General-purpose PLLs, 528 User I/Os
EPCS64 serial configuration device
On-board USB-Blaster circuitry
JTAG and AS mode configuration supported
128MB (32Mx32bit) SDRAM
2MB (1Mx16) SRAM
8MB (4Mx16) Flash memory with 8-bit mode
32Kbit EEPROM
18 x switches and 4 x push-buttons
18 x red and 9 x green LEDs
8 x 7-segment displays
24-bit CODEC
Line-in, line-out, and microphone-in jacks
16 character x 2 line LCD module
3 x 50MHz oscillator clock inputs
SMA connectors (external clock input/output)
SD card slot provides SPI and 4-bit SD mode for SD Card access
Integrated 10/100/1000 Gigabit Ethernet
Support for Industrial Ethernet IP cores
USB Type A and B sockets provide host and device controller compliant with USB 2.0
VGA socket: VGA DAC (high-speed triple DACs)
RS-232 port with flow control
Infrared receiver module
TV-in connector with TV decoder (HTSC/PAL/SECAM)

Supplied with

ICB-HSMC communications board, USB cable, remote control, 2 x wires strips, 2 x 1-pin headers, 6 x silicon footstands, Design Suite DVD, INK System CD

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specificaties
Kenmerk Waarde
Kit Classification Development Kit
Kit Name Cyclone IV Industrial
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
868,14
(excl. BTW)
1.050,45
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
868,14 €
10 - 19
845,88 €
20 +
824,73 €
Related Products
The HFBR-0527PZ evaluation kit, from Avago, is designed ...
Description:
The HFBR-0527PZ evaluation kit, from Avago, is designed to facilitate the evaluation of 650nm Versatile Link transmitter: HFBR-1527Z (stock no. 236-795) and receiver HFBR-2526Z (stock no. 236-830). Suitable for data transmission at signal rates of 1 to 125MBd, HFBR-1527Z and ...
1 M.2 SSD enclosure (CM42 or CM80)1 M.2 ...
Description:
1 M.2 SSD enclosure (CM42 or CM80)1 M.2 adapter1 Type-C to Type-A USB cable (45cm)1 metal plate1 aluminium sticker1 screwdriver3 mounting screws (CM42)/4 mounting screws (CM80)1 copper nut (CM80 only).
The 2.5" SSD/HDD Enclosure uses a stylishly designed ...
Description:
The 2.5" SSD/HDD Enclosure uses a stylishly designed Aluminium case to house a 2.5-inch SATA hard drive or solid state drive up to 9.5mm in height. With the SuperSpeed USB 3.1 Gen 1 interface, the StoreJet 25S3 is perfect for ...
The Maxim Integrated MAX20463A evaluation kit (EV kit) ...
Description:
The Maxim Integrated MAX20463A evaluation kit (EV kit) demonstrates the MAX20463A a small, integrated USB Type-C™ solution for automotive radio, navigation, connectivity, and USB head units and infotainment applications. The device provides a one-chip solution to convert an existing downstream-facing ...