Microchip, Analyzer CAN Bus Development Kit - APGDT002

  • RS-stocknr. 715-4255
  • Fabrikantnummer APGDT002
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

CAN BUS Analyzer Tool

The Microchip APGDT002 CAN Bus Analyzer Tool is a development tool which is a CAN bus monitor that is used to develop and debug high-speed CAN networks.

What’s included?
1 x CAN BUS Analyzer Tool
1 x CD with software (also available as download from Microchip website)
1 x USB mini cable (for connecting to a PC)

What is CAN?
CAN bus, short for Controller Area Network, a message-based protocol, used primarily for communication between microcontrollers within cars and other vehicles.

How does it connect?
The CAN Bus Analyzer connects to a PC via the USB cable provided. You will require a PC with a Microsoft Windows operating system and a USB port. There is also a DB9 connector for the CAN bus.

What are the status LEDs for?
There are several LEDs on top of the device which are there to indicate USB status and power. There is also CAN related LEDs for RX and TX traffic, and for CAN BUS errors.

CAN Bus Communication - Microchip

Specificaties
Kenmerk Waarde
Kit Classification Development Kit
Kit Name Analyzer
14 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
97 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
93,68
(excl. BTW)
113,35
(incl. BTW)
Aantal stuks
Per stuk
1 +
93,68 €
Related Products
The USB to Serial Bridge Controller provides a ...
Description:
The USB to Serial Bridge Controller provides a single configurable serial channel for UART/I²C/SPI interfaces, with low power consumption in stand-by mode.The CY7C65211 controller integrates CapSense capacitive-touch sensing technology (for touch sensitive key switches), and Battery Charging Detection logic. The ...
The Cypress Semiconductor USB development kit is a ...
Description:
The Cypress Semiconductor USB development kit is a super speed USB 3.3 peripheral controller providing integrated and flexible features. It has a fully configurable, parallel, a general programmable interface called GPIF II, which can connect to any processor, ASIC or ...
The STMicroelectronics development kit is an RF discovery ...
Description:
The STMicroelectronics development kit is an RF discovery kit featuring the CMWX1ZZABZ-091 LoRa module from Murata. This module incorporates the SX1276 low-power transceiver, which features a long-range modem. This module supports high performance and OOK/FSK modulations. The transceiver is controlled ...
The ST25DV-DISCOVERY is a demonstration kit to evaluate ...
Description:
The ST25DV-DISCOVERY is a demonstration kit to evaluate the features and capabilities of the ST25DV series of dynamic NFC/RFID tag ICs. • 168MHz STM32F415VGT6 Cortex-M4F MCU with 1MB Flash memory, 192 + 4KB SRAM • On-board ST-LINK hardware for microcontroller ...