STMicroelectronics ST25DV-DISCOVERY, ST25DV04K RFID Development Kit Discovery for NFC/RFID

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Discovery Kit for ST25DV04K NFC/RFID Tag IC

The ST25DV-DISCOVERY is a demonstration kit to evaluate the features and capabilities of the ST25DV series of dynamic NFC/RFID tag ICs.

ST25DX Discovery Motherboard

• 168MHz STM32F415VGT6 Cortex-M4F MCU with 1MB Flash memory, 192 + 4KB SRAM • On-board ST-LINK hardware for microcontroller firmware upgrade and debug
• Harvested energy measurement circuit
• 320 x 200p colour LCD touchscreen
• User LED
• Status LEDs: Power, ST-LINK activity, Energy-Harvesting
• Reset and User pushbuttons
• Thumb joystick for menu selection
• ST-LINK mini USB connector
• User micro USB connector
• Powered from either USB connector
• Demonstration cases stored in memory

NFC/RFID Antenna Board

• Class 1 45 x 75mm, 13.56MHz inductive PCB antenna • ST25DV04K Dynamic NFC/RFID tag device with 4Kbit EEPROM
• I²C serial bus interface connector
• Energy harvesting output with 10nF filter circuit
• GPO configurable as RF WIP/BUSY output

Near field communication (NFC) - STMicroelectronics

Specificaties
Kenmerk Waarde
RF Technology RFID
Kit Classification Development Kit
For Use With NFC/RFID
Featured Device ST25DV04K
Kit Name Discovery
30 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
33,66
(excl. BTW)
40,73
(incl. BTW)
Aantal stuks
Per stuk
1 +
33,66 €
Related Products
The B-L475E-IOT01A Discovery kit allows users to develop ...
Description:
The B-L475E-IOT01A Discovery kit allows users to develop applications featuring direct connection of wireless IoT sensors to cloud servers. It is supported by a wide range of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs. • STM32L475VG low-power ...
The Maxim Integrated MAX25601 evaluation kit (EV kit) ...
Description:
The Maxim Integrated MAX25601 evaluation kit (EV kit) provides a proven design to evaluate the MAX25601A automotive high-voltage, high-brightness LED (HB LED) boost-buck controller. The front-end pre-boost operates from a 7.7V to 18V DC supply voltage, generating a 48V output. ...
Pre-sensitised printed circuit boards for making power supply ...
Description:
Pre-sensitised printed circuit boards for making power supply cards, SMT power transistor-based circuits, hybrid power circuits etc.These boards are also used as Insulated Metal Substrate (IMS) in optoelectronics for the design of power LED circuits such as OSRAM's Golden Dragon ...
300nA Quiescent Supply Current Into OUTTrue Shutdown Mode0.5nA ...
Description:
300nA Quiescent Supply Current Into OUTTrue Shutdown Mode0.5nA Shutdown CurrentOutput Disconnects from InputNo Reverse Current with VOUT 0V to 5V95% Peak Efficiency400mV to 5.5V Input Range0.88V Minimum Startup Voltage1.8V to 5V Output Voltage Range100mV/StepSingle 1% Resistor Selectable Output225mA, 500mA, and ...