Block FS-2E-4215-10 Bobbin Coil Former

  • RS-stocknr. 840-7276
  • Fabrikantnummer FS-2E-4215-10
  • Fabrikant Block
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Block FS-2E Series Size 42/21/15 Ferrite Transformer Bobbins

FS-2E series size 42/21/15 ferrite transformer bobbins with insulation according to class B and flammability to UL 94 V-0. These ferrite transformer bobbins are available as horizontal (stock number 840-7285) or vertical (stock number 840-7276) mount. Typical applications for these ferrite bobbins include transformers and inductors in switch mode power supplies.
For ferrite cores please see stock number 840-7159 typically

Transformer Ferrite Kits - Cores

The AL value in the table applies to a core set consisting of two cores without air gap Cores ETD conform to IEC 51(CO)276

Specificaties
Kenmerk Waarde
Accessory Type Bobbin
For Use With Choke Converter Topologies, Transmitter
38 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1,74
(excl. BTW)
2,11
(incl. BTW)
Aantal stuks
Per stuk
1 +
1,74 €
Related Products
EPCOS B65822 RM5 Coil Formers made from GFR ...
Description:
EPCOS B65822 RM5 Coil Formers made from GFR Liquid Crystal Polymer UL 94 V-0 insulation class to IEC 60085, Solderability to IEC 60058-2-58. Maximum operating temperature 155°C.
EPCOS PQ32/20 and P32/30 Vertical coil formers are ...
Description:
EPCOS PQ32/20 and P32/30 Vertical coil formers are made from GFR thermosetting plastic ul 94 V-0 insulation class to IEC 60085. Maximum operating temperature 180°C. Solderability to IEC 60068-2-20.
EPCOS E13/7/4 Coil formers made from polyterethalate UL ...
Description:
EPCOS E13/7/4 Coil formers made from polyterethalate UL 94 V-0 Insulation class to IEC60085.Maximum operating temperature 155°C solderability to IEC 60068-2-58 The SMD coil former with gullwing terminals is made from GFR liquid crystal polymer.
EPCOS E13/7/4 Coil formers made from polyterethalate UL ...
Description:
EPCOS E13/7/4 Coil formers made from polyterethalate UL 94 V-0 Insulation class to IEC60085.Maximum operating temperature 155°C solderability to IEC 60068-2-58 The SMD coil former with gullwing terminals is made from GFR liquid crystal polymer.