Block FS-2E-3611-20 E 36 Coil Former, 16 Pins

  • RS-stocknr. 161-7774
  • Fabrikantnummer FS-2E-3611-20
  • Fabrikant Block
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Block FS-2E Series Size 36/18/11 Ferrite Transformer Bobbins

FS-2E series size 36/18/11 ferrite transformer bobbin with insulation according to class B and flammability to UL 94 V-0. This ferrite transformer bobbins is horizontal mounting. Typical applications for this ferrite bobbin includes transformers and inductors in switch mode power supplies.
For ferrite cores please see stock number 840-7156 typically

Transformer Ferrite Kits - Cores

The AL value in the table applies to a core set consisting of two cores without air gap Cores ETD conform to IEC 51(CO)276

Specificaties
Kenmerk Waarde
Accessory Type E 36
For Use With FS-1E-36
Number of Pins 16
20 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Bag of 5)
1,476
(excl. BTW)
1,786
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
5 +
1,476 €
7,38 €
*prijsindicatie
Related Products
EPCOS PQ32/20 and P32/30 Vertical coil formers are ...
Description:
EPCOS PQ32/20 and P32/30 Vertical coil formers are made from GFR thermosetting plastic ul 94 V-0 insulation class to IEC 60085. Maximum operating temperature 180°C. Solderability to IEC 60068-2-20.
EPCOS E13/7/4 Coil formers made from polyterethalate UL ...
Description:
EPCOS E13/7/4 Coil formers made from polyterethalate UL 94 V-0 Insulation class to IEC60085.Maximum operating temperature 155°C solderability to IEC 60068-2-58 The SMD coil former with gullwing terminals is made from GFR liquid crystal polymer.
B66359 series ETD 29/16/10 coil formers from EPCOS ...
Description:
B66359 series ETD 29/16/10 coil formers from EPCOS feature squared pins and are offered with a 13 pin horizontal axis version or a 14 pin vertical axis. They are suitable for use with B66358 ferrite cores.Varieties with a horizontal magnetic ...
B66414W EFD 15/8/5 coil formers from EPCOS are ...
Description:
B66414W EFD 15/8/5 coil formers from EPCOS are constructed from GRF thermosetting plastic and feature 8 squared pins. They meet the UL 94 V-0 standard and have an insulation class of IEC 60085:H with a maximum operating temperature of +180°C. ...