Molex Right Angle 50Ω PCB Mount SMA Jack, Solder Termination

  • RS-stocknr. 759-5252
  • Fabrikantnummer 73251-3130
  • Fabrikant Molex
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

Molex 50 Ohm SMA RF Coaxial PCB Jack Connectors

50 Ohm SMA RF coaxial PCB mount Jack Receptacles with a teflon dielectric, gold plated centre contact and brass body with Gold plating except 800-6918 and 800-6936 which have Nickel plated bodies.
These SMA RF coaxial PCB mount Jack Receptacles features are:
759-5293 PCB and Panel mount, supplied with a jam nut and lock washer.
759-5299 Edge mount, 1.6 mm thick PCB, length from PCB edge is 9.53 mm.
759-5252 Right Angle, Through Hole
800-6918 Right Angle, Through Hole Nickel plated
800-6961 Edge Mount, 1.6 mm thick PCB, length from PCB edge is 12.7 mm.
759-5303 Vertical, Through Hole
800-6933 Vertical, SMT
800-6949 Edge and Bulkhead mount (no hardware)
800-6936 Right Angle, PCB and Bulkhead mount, Nickel plated
841-1827 Right Angle, PCB mount, Through Hole
800-6986 Jack to Jack Bulkhead Adapter

Molex 50 Ω SMA RF Coaxial PCB Jack Connector

From Molex, this SMA RF coaxial cable connector is right angled and PCD mounted. With a Teflon dielectric and gold plated centre contact, combined with a threaded coupling design, this high-performance coaxial cable connector ensures a sturdy and reliable connection.
This Molex SMA RF Coaxial jack has a brass body and gold plating, resulting in a high mechanical strength.

Features and Benefits

• Robust design
• Threaded connection
• Reduced attenuation

Application Information

Version A Subminiature Connectors are often used with WiFi antenna systems, and are commonly found in network connections for both domestic and commercial environments.

Molex SMA RF Coaxial Connectors

The Molex range of high- performance SMA RF Coaxial subminiature Connectors are suitable for microwave frequencies. The SMA design of threaded couplings gives uniform contact of the outer conductors to reduce reflections and attenuation at higher frequencies. High mechanical strength and durability are also ensured by the threaded SMA design.

Specificaties
Kenmerk Waarde
Gender Female
Coaxial Connector Type SMA Connector
Mounting Type PCB Mount
Impedance 50Ω
Termination Method Solder
Body Orientation Right Angle
Size Subminiature
Bulkhead No
Body Plating Gold
Polarity Normal
Series SMA
Contact Material Beryllium Copper
Contact Plating Gold
Series Number 73100
69 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
286 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
8,94
(excl. BTW)
10,82
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
8,94 €
15 - 49
3,03 €
50 - 99
2,68 €
100 - 249
2,52 €
250 +
2,35 €
Verpakkingsopties
Related Products
From Lumberg, this 2 Pole Jack chassis socket ...
Description:
From Lumberg, this 2 Pole Jack chassis socket is designed for back side mounting to printed circuit boards. • Contact Resistance is ≤ 30mΩ• Good solder connection• Insulation resistance ≥ 100 MΩ• Operating temperature ranges between -25°C and 60°C• Provides ...
A series of Jack Chassis Sockets brought to ...
Description:
A series of Jack Chassis Sockets brought to you by Lumberg. Each jack is right angled, making them perfect for situations where space is an issue when mounted on a circuit board. These female sockets are sturdy and robust, ensuring ...
Brought to you by Switchcraft, a selection of ...
Description:
Brought to you by Switchcraft, a selection of miniature panel mount jack plugs and jack sockets commonly used in headphone applications. A sturdy and robust design, these jacks ensure that your application performs to the highest standard. All models are ...
The Decelect Forgos 3.5mm PCB jack socket is ...
Description:
The Decelect Forgos 3.5mm PCB jack socket is cost-effective and reliable. The enclosed socket is chassis fitting, with solder terminating tabs for PCB mounting. The mount bushing screws onto the connector head to hold the jack securely to a panel. ...