Huber & Suhner 50Ω Right Angle Cable Mount MBX Connector, Plug

  • RS-stocknr. 741-7222
  • Fabrikantnummer 16_MBX-50-2-1/113_NE
  • Fabrikant Huber & Suhner
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CH
Productomschrijving

MBX Connector Cable Plugs

Hubner + Suhner MBX cable connectors are for applications requiring cable to board interfacing, durable MBX cable connectors with around 100 mating cycles and low engagement force.

Frequency DC - 6 GHz
50Ω impedance
Working voltage 250 Vrms - 50 Hz

Note

Suitable cables: ENVIROFLEX_316_D, K_02252_D, G_02232_D

Standards

MIL-STD-202, Method 107 G, Condition A1; MIL-STD-202, Method 106 F; MIL-STD-202, Method 101, Condition B; MIL-STD-202, Method 204 D, Condition A; MIL-STD-202, Method 213 B, Condition B

HUBNER + SUHNER MBX Series Connectors

Specificaties
Kenmerk Waarde
Coaxial Connector Type MBX Connector
Gender Male
Mounting Type Cable Mount
Impedance 50Ω
Termination Method Crimp
Body Orientation Right Angle
Operating Frequency 0 to 6GHz
Contact Material Beryllium Copper
Contact Plating Gold over Enickel
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
19,49
(excl. BTW)
23,58
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
19,49 €
15 - 49
17,73 €
50 - 99
15,95 €
100 - 249
15,06 €
250 +
13,75 €
Related Products
The SMP series meets MIL STD 348 specifications ...
Description:
The SMP series meets MIL STD 348 specifications the,DESC specifications 94007 & 94008. Typical applications, high density packaging, phased array antenna, satellite,airborne/shipborne/ground radar, communication equipment. Full detent.
The QN series is based on the inner ...
Description:
The QN series is based on the inner dimensions and performance of the N connector; however, instead of a threaded coupling mechanism, a SNAP-ON mechanism is used, offering a time-saving and fail-safe mounting. The QN series also allows increased packaging ...
The interface is based on the SMA dimensions, ...
Description:
The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and ...
HUBER+SUHMNER MMCX connectors are designed to be used ...
Description:
HUBER+SUHMNER MMCX connectors are designed to be used where the smallest possible dimensions have to be achieved. The reliable 'snap-on' coupling mechanism ensures the electrical parameters are consistently reproduced. The SMT connectors are suitable to all reflow-soldered SMT PCBs where ...