TE Connectivity 75Ω Right Angle PCB Mount BNC ConnectorBulkhead Fitting, jack

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

TE Connectivity 75 Ohm ZDC/BNC Shielded PCB Sockets

75 Ohm ZDC/BNC shielded right angle/elbow mount PCB socket with solder terminal, polyethylene dielectric and nickel plated zinc body. This 75 Ohm ZDC/BNC shielded right angle/elbow mount PCB jack is rear panel mounting with bulkhead, hex nut retention and requires a panel cut-out of 12 x 12.9mm.

TE Connectivity BNC RF Coaxial Connectors

Specificaties
Kenmerk Waarde
Gender Female
Coaxial Connector Type BNC Connector
Mounting Type PCB Mount
Impedance 75Ω
Termination Method Through Hole
Body Orientation Right Angle
Bulkhead Yes
Operating Frequency 0 to 2GHz
Body Plating Nickel
Maximum Operating Temperature +85°C
Series Greenpar
Contact Material Brass
Contact Plating Gold over Nickel over Copper
128 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
3,40
(excl. BTW)
4,11
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
3,40 €
10 - 24
3,06 €
25 - 49
2,76 €
50 - 99
2,48 €
100 +
2,24 €
Related Products
The BNC is a bayonet style connector allowing ...
Description:
The BNC is a bayonet style connector allowing for quick connect and disconnect with a positive locking mechanism. Mating is achieved with just a quarter turn of the coupling nut. With a classic, dependable design, BNCs are suited to accommodate ...
ZDC series PCB mount RF coaxial BNC socket ...
Description:
ZDC series PCB mount RF coaxial BNC socket connectors with MIL-C-39012 and MIL STD348A compatible interfaces and precision cast nickel plated zinc body. These ZDC series PCB mount RF coaxial jacks have a bayonet coupling for a quick mating connection ...
RF Interface=SMA, RF Connector Style=Jack, Connector System=Cable-to-Cable, Sealable=No, ...
Description:
RF Interface=SMA, RF Connector Style=Jack, Connector System=Cable-to-Cable, Sealable=No, Connector & Contact Terminates To=Wire & Cable, Number of Positions=1, PCB Mount Orientation=Right Angle, Number of Coaxial Contacts=1, Cable Connector Orientation=Right Angle, Body Material=Zinc Alloy, Body Finish=Plated, ...
ZDC series PCB mount RF coaxial BNC socket ...
Description:
ZDC series PCB mount RF coaxial BNC socket connectors with MIL-C-39012 and MIL STD348A compatible interfaces and precision cast nickel plated zinc body. These ZDC series PCB mount RF coaxial jacks have a bayonet coupling for a quick mating connection ...