RS PRO 50Ω Straight Cable Mount SMP Connector, Plug

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

RS PRO SMP Connector

The RS PRO cable mount SMP connector is a 50ohm male snap-on mating jack adapter. It is a straight SMPM plug to 1.85mm adapter with a push-on connection. Its size is about 70% smaller than the standard SMP connectors. The connector has an excellent performance from DC to 65GHz. The 1.85mm end is compatible with 2.4mm connector.

Features and Benefits

• Operating temperature ranges between -55°C and 165°C
• Termination method is solder
• Impedance is 50ohm
• Operating frequency is 65GHz

Applications

• High packaging density applications
• Tight space applications

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Coaxial Connector Type SMP Connector
Gender Male
Mounting Type Cable Mount
Impedance 50Ω
Termination Method Solder
Body Orientation Straight
Size Standard
Operating Frequency 65GHz
Minimum Operating Temperature -55°C
Maximum Operating Temperature +165°C
Contact Material Beryllium Copper
Contact Plating Gold
195 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
13,22
(excl. BTW)
16,00
(incl. BTW)
Aantal stuks
Per stuk
1 +
13,22 €
Related Products
The RS Pro straight cable mount N-type, male ...
Description:
The RS Pro straight cable mount N-type, male connector plug is used for 1/4in helical cable application. The low PIM connector series is ideal where PIM (Passive Inter-modulation Distortion) is a concern for the design work. The centre contact has ...
This is a straight low PIM 7/16 plug ...
Description:
This is a straight low PIM 7/16 plug to plug adapter. Low PIM connector series is ideal where PIM (Passive Inter-modulation Distortion) is a concern to the design work. The connectors are designed with low-loss construction and waterproof protection. Impedance: ...
Reverse polarity SMA connectors share the same performace ...
Description:
Reverse polarity SMA connectors share the same performace characteristics of standard SMAs but the pin and socket are reversed. For use with RF coaxial cable type RG58/U, diameter 0.85mm. Flush socket and dielectric rather than a raised pin indicates a ...
A series of connectors to MIL specifications with ...
Description:
A series of connectors to MIL specifications with high quality materials and PTFE insulation. Non-constant impedance design, suitable for use up to 500V peak and 200MHz, or up to 500MHz with diminished performance. For 50Ω cable use crimp tool stock ...