BEHA-Amprobe CHB5 Clamp Meter, Max Current 50A ac CAT II 600 V, CAT III 300 V With UKAS Calibration

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: TW
Productomschrijving

CHB5 Leakage Current Clampmeter

Digital Leakage Current Clamp meter (German version) with Harmonic measurement TRMS (AC) functions

4 digit liquid-crystal display
Manual range selection for current and voltage measurements
Current Measurements
Leakage Current Measurement
Voltage Measurement
Harmonics of AC Current in Magnitude (mA or A) or in Percentage (%)
Total Harmonic Distortion (% THD-F)
Harmonic measurement (up to 99th harmonic)
Crest Factor (C.F.)
True RMS Measurement
MIN/MAX/Peak Measurement
Contactless frequency measurement
Hold function
0.01 mA resolution
30 mm diameter conductor jaw capacity
Auto power-off
Safety to DIN VDE 0411/EN 61010 / IEC 61010

Standards

CAT II/600 V, CAT III/300 V

Supplied with

2 x test leads with probes (red/black), 2 x 1,5V IEC LR6 batteries, holster, instruction manual

Specificaties
Kenmerk Waarde
Absolute Maximum AC Current Measurement 50A ac
Absolute Maximum AC Voltage Measurement 600V ac
Model Number CHB5
Calibrated UKAS
AC Current Measurement Resolution 10µA ac
Clamp Meter Type Crest Factor
Best AC Current Accuracy ±1.5% + 5 Digits
Best AC Voltage Accuracy ±1.5% + 5 Digits
Minimum Operating Temperature -10°C
Height 35.6mm
AC Voltage Measurement Resolution 0.1V ac
Maximum Conductor Size 30mm
Weight 200g
True RMS Yes
Functions Measured AC Current, AC Voltage
Dimensions 210 x 62 x 35.6mm
Safety Category Level CAT II, CAT III
Maximum Operating Temperature +50°C
Display Type LCD
Safety Category CAT II 600 V, CAT III 300 V
Width 62mm
Power Source Battery
Length 210mm
Battery Type LR6
Safety Category Voltage 300 V, 600 V
1 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
621,00
(excl. BTW)
751,41
(incl. BTW)
Aantal stuks
Per stuk
1 +
621,00 €
Related Products
The Fluke milliamp process clamp meter measures current ...
Description:
The Fluke milliamp process clamp meter measures current between 4mA and 20mA loops without breaking the loop or bringing down the system. Best in class 0.2% accuracy0.01mA resolution and sensitivityMeasure mA signals for PLC and control system analogue I/ODual backlit ...
From the trusted RS PRO, the ICM 2000N ...
Description:
From the trusted RS PRO, the ICM 2000N is a great value clampmeter which uses Hall effect technology for precise measurement of ac and dc current.Battery-powered for maximum portability, this multifunction current clamp meter is ideal for on-the-go applications in ...
RS Pro IEK10N Digital Multimeter with Current Clamp. ...
Description:
RS Pro IEK10N Digital Multimeter with Current Clamp. 300 A ac non-intrusive current measuringVoltage measurement to 600 V ac/dcOhms ranges from 300 Ω → 30 MΩ3200 Count display (0.1 mV resolution at 300 V)65 segment analogue bar graphMains proof ohms ...
Standard: IEC 1010-1 Cat. III, deg. 2. Hall ...
Description:
Standard: IEC 1010-1 Cat. III, deg. 2. Hall effect current probes allowing measurement of direct or alternating currents, without disturbing or breaking the circuit.Multimeter (PAC 20 and 21) or oscilloscope (PAC 22) output.Voltage output.Zero adjustment by means of a thumb ...