Megger DCM300E Clampmeter, Max Current 300A ac CAT II 600 V, CAT III 500 V With UKAS Calibration

  • RS-stocknr. 459-3152
  • Fabrikantnummer DCM300E
  • Fabrikant Megger
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: JP
Productomschrijving

AVO DCM 300E

Fully IEC1010-1 and IEC101-2-032 compliant for circuits up to 500V phase to phase or 300V phase to earth CAT III or 600V CAT II
30mA and 300mA ranges for leakage current measurement
0.01mA resolution on 30mA range
30A and 300A ranges for power measurements
Data hold facility
Maximum conductor size 40mm diameter
3200 count LCD display with analogue bar graph

Supplied with

Batteries, instruction manual, carrying case.

Specificaties
Kenmerk Waarde
Absolute Maximum AC Current Measurement 300A ac
Model Number DCM300E
Calibrated UKAS
AC Current Measurement Resolution 10µA ac
Clamp Meter Type Leakage Clamp Meter
Best AC Current Accuracy ±5% +5 digits
Weight 125g
Safety Category Level CAT II, CAT III
Minimum Operating Temperature 0°C
Safety Category Voltage 500 V, 600 V
Safety Category CAT II 600 V, CAT III 500 V
Display Type LCD
Maximum Operating Temperature +40°C
Functions Measured AC Current
Power Source Battery
Width 64mm
Length 23mm
Dimensions 23 x 64 x 176mm
Height 176mm
Battery Life 50 h
Jaw Capacity Busbars 40mm
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 01/10/2020, met een levertijd van 1 werkdag.
Prijs Each
508,00
(excl. BTW)
614,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
508,00 €
Related Products
Troubleshooting test tool kit for finding circuit breakers ...
Description:
Troubleshooting test tool kit for finding circuit breakers and hidden wire problems in electrical wiring installations. Identifies breakers/fuses with CertainCircuit™ detection, finds open and shorts circuits and trace wires behind walls and underground. Tests energized circuits up to 600V AC/DC ...
From RS PRO, this ICM30R clamp meter is ...
Description:
From RS PRO, this ICM30R clamp meter is a high performing solution for current measurement. The multifunction clampmeter utilises Hall Effect technology and nickel steel alloy jaws for precise measurement of ac and dc current up to 300 A.It functions ...
The Megger digital clamp meter is a highly ...
Description:
The Megger digital clamp meter is a highly versatile instrument and ideal for use in the installation, maintenance, monitoring or checking of AC-DC electrical systems and equipment. Meter can measure AC/DC voltage. The jaw opening diameter for the clamp meter ...
Standard: IEC 1010-1 Cat. III, deg. 2. Hall ...
Description:
Standard: IEC 1010-1 Cat. III, deg. 2. Hall effect current probes allowing measurement of direct or alternating currents, without disturbing or breaking the circuit.Multimeter (PAC 20 and 21) or oscilloscope (PAC 22) output.Voltage output.Zero adjustment by means of a thumb ...