Seeit FLASHPRO FLASHPRO, Serial Components Programmer for EEPROMs 24C / 25C, SPI FLASHs 25xxxx Programmer, ZIF16 Socket

  • RS-stocknr. 919-5494
  • Fabrikantnummer FLASHPRO
  • Fabrikant Seeit
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

FLASHPRO EEPROM/FLASH Programmer

The FLASHPRO from Seeit is a serial components programmer featuring a ZIP16 socket and a USB connector. It supports EEPROMs I2C and FLASH SPI standards. A full list of compatible devices can be found on the datasheet.
Software supplied with the FLASHPRO enables you to read, write and erase quickly and easily. You can also verify the BIOS computer memory, TV or DVD EEPROMs, routers, and so on.
Simply connect your FLASHPRO to a compatible PC via its USB port, without the need for an additional power supply. The component power supply is selectable (3.3 V or 5 V) with a built-in switch.

FLASHPRO kit includes:
Programmer
USB cable
Software CD
User manual

Features of the FLASHPRO programmer:
EEPROM/FLASH SPI
ZIP16 socket
Power supply on USB
Accepted file formats: BINARY, Intel (Extended) HEX
Support low voltage devices from 3.3 V to 5 V
Windows 98/ME/2000/XP/VISTA/Windows 7/8/ 10 (32 bits to 64 bits).
Functions: Read/Write/Blank-Check Write/Verify/Blank-Check/Erase
Dimensions: 188 x 115 x 34 mm
Weight: 195 g

PC Based Programmers

Specificaties
Kenmerk Waarde
Accessory Type Serial Components Programmer
For Use With EEPROMs 24C / 25C, SPI FLASHs 25xxxx Programmer, ZIF16 Socket
Interface USB
Programmer Name FLASHPRO
Memory Type Programmed EEPROM, FLASH
5 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Box of 1
72,84
(excl. BTW)
88,14
(incl. BTW)
Box(es)
1 +
72,84 €
Related Products
The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast ...
Description:
The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and programming of PIC® and dsPIC® flash microcontrollers, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE), version 4.15. The MPLAB PICkit 4 is connected ...
The Microchip Technology MPLAB snap debugger programmer is ...
Description:
The Microchip Technology MPLAB snap debugger programmer is a powerful 32-bit 300MHz SAM E70 Arm® Cortex®-M7 based MCU meant for quicker debug iterations. This MPLAB programmer supports 4-wire JTAG and serial wire debug with streaming data gateway. It is also ...
The PIC-01 allows you to program Microchip serial ...
Description:
The PIC-01 allows you to program Microchip serial PIC microcontrollers, (PIC12Cxxx, PIC12CExxx, PIC12Fxxx, PIC16Cxxx, PIC16CExxx, PIC16Fxxx, and PIC18Fxxxx families), as well as serial EEPROMs Series, (24Cxx family).Equipped with 5 tulip sockets, supports components in DIP packages of 8, 18, 28 ...
The Dataman 48Pro2 is a PC based universal ...
Description:
The Dataman 48Pro2 is a PC based universal 48-pin programmer with ISP capabilities and USB 2.0 / parallel connectivity. The 48Pro2 is built to meet the demands of development labs and field engineers for super fast universal programming. Supporting over ...