Cypress Semiconductor PSoC Development Board - CY8CKIT-002

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

PSoC® MiniProg3 Program and Debug Kit

Cypress Semiconductor CY8CKIT-002 PSoC® MiniProg3 Program and Debug Kit is a low-cost aid to help developers who want to build their own systems around Cypress 8- and 32-bit PSoC devices. The kit is a programmer for PSoC 1, PSoC 3, PSoC 4 and PSoC 5LP architectures and a debug tool for PSoC 3, PSoC 4 and PSoC 5LP architectures.

MiniProg3 provides the flexibility to work with different programming and debugging interfaces, such as JTAG, SWD, ISSP and I²C. When programming, MiniProg3 enables communication with target devices using I/O voltage levels from 1.5V to 5.5V. In addition, MiniProg3 can supply power to a simple target board at one of four voltage levels: 1.8V, 2.5V, 3.3V, or 5V.

Kit Contents

- MiniProg3 programmer/debugger

- 10-pin ribbon cable

- USB Standard-A to Mini-B cable

- Quick Start Guide

Applications

- Embedded Design & Development

Note

Requires a PC running Microsoft Windows XP, Vista or 7.

Digital Signal Processors, Cypress Semiconductor

7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
103 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
83,31
(excl. BTW)
100,81
(incl. BTW)
Aantal stuks
Per stuk
1 +
83,31 €
Related Products
The Atmel-ICE series consists of development tools for ...
Description:
The Atmel-ICE series consists of development tools for debugging and programming ARM Cortex-M based Atmel SAM and Atmel AVR microcontrollers with on-chip debug capability. The Atmel-ICE series supports JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfaces and is compatible ...
The Microchip Technology MPLAB snap debugger programmer is ...
Description:
The Microchip Technology MPLAB snap debugger programmer is a powerful 32-bit 300MHz SAM E70 Arm® Cortex®-M7 based MCU meant for quicker debug iterations. This MPLAB programmer supports 4-wire JTAG and serial wire debug with streaming data gateway. It is also ...
This USB-based emulator provides an easy, portable, non-intrusive, ...
Description:
This USB-based emulator provides an easy, portable, non-intrusive, target-based debugging solution for Analog Devices JTAG processors and DSPs. It performs a wide range of emulation functions, including single-step and full speed execution with pre-defined breakpoints, and viewing and/or altering of ...
In-Circuit Debugger (ICD 2) allows the debugging of ...
Description:
In-Circuit Debugger (ICD 2) allows the debugging of a range of PIC microcontrollers through the MPLAB® Integrated Development Environment (IDE). The ICD 2 module connects between the PC and the user's target board allowing direct in-circuit debugging of the target ...