RS PRO Brass Single Non Return Valve 3/4 in BSP

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: IT
Productomschrijving

Female/Male Ports

For heating, sanitary and compressed air systems, pumps and autoclaves
Body in hot forged DZR brass
Threading to BS2779
Hostaform inner valve
Spring in 18//8 AISI 302-304 stainless steel
Hydrostatic test pressures 30 bar/435psi (shell), 22 bar/315psi (seat)
Compact design, allows flow in one direction only, indicated by arrow on valve body
Installation in vertical, horizontal or oblique pipelines
Snap-in, spring loaded non- return valve, WRC approved
Low pressure drop, prevents water hammer
Full flow area equal to nominal size

Standards

BS 2779

Specificaties
Kenmerk Waarde
Type Single
Connection 3/4 in BSP
Body Material Brass
Maximum Working Pressure 16 bar
Thread Size 3/4in
Thread Standard BSP
17 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
54 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
10,04
(excl. BTW)
12,15
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
10,04 €
5 - 9
9,71 €
10 +
9,42 €
Related Products
Application : Industry, pneumatics, hydraulic, plumbing installationsOperating Temperature ...
Description:
Application : Industry, pneumatics, hydraulic, plumbing installationsOperating Temperature : -20゚C / +100゚C Operating pressure : see non-shock cold working pressure chart on data sheetThreads : ISO 228 parallel female by female threads Stem : NylonNBR 65 SH/PS seal on nylon ...
This Sferaco check valve is anti-pollution to prevent ...
Description:
This Sferaco check valve is anti-pollution to prevent reverse water flow. Constructed from brass that ensures strength and reliability. Featuring a male and female connection of " (10 mm). Brass construction Control the flow of water Strong and reliable fitting ...
Spirax Sarco combined sight glass and check valve ...
Description:
Spirax Sarco combined sight glass and check valve has been designed to observe discharges from steam traps. There is no need for a separate check valve as the condensate rises after the trap due to its position, thus simplifying installation. ...
RS Pro Brand Screwed End Swing Check Valves ...
Description:
RS Pro Brand Screwed End Swing Check Valves that allow liquids to flow in only one direction. 1/2 - 3" (DN15 - DN80)W.P: 200 WOGW.T: -20°C - 200°C (-4°F - 392°F)Investment castingSocket weld (option)Thread type: ASME B1.20.1 (NPT), DIN 2999 ...