RS PRO Brass Single Non Return Valve 1-1/2 in BSPP

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

S.126 Brass Swing Check Valve

Application : Industry, pneumatics, hydraulic, plumbing installations
Operating Temperature : +0゚C / +90゚C
Operating pressure : PN12 1/2' to 1’’, PN10 1.1/4’’ to 2’’, PN8 2.1/2’’ to 4’’
Threads : ISO 228 parallel female threads
Metal seal
Compact inspection cap
100% Made in Italy
Low pressure drop
Water hammer resistant

Note

Approvals apply to specific configurations only

Approvals

GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
RoHS Compliant

Standards

BS5154/B - PN 16

Non Return/Check Valves - Swing Type

Non-return or check valves which allow flow in one direction only.

Warning

  • Freezing of the fluid in the installation may severely damage the valve
Specificaties
Kenmerk Waarde
Type Single
Connection 1-1/2 in BSPP
Body Material Brass
Maximum Working Pressure 16 bar
Thread Size 1-1/2in
Thread Standard BSP
11 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
33 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
35,93
(excl. BTW)
43,48
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
35,93 €
5 - 9
34,83 €
10 +
33,70 €
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgingsEPDM sealsCreep resistant bearingsReinforced nylon handleReduced risk of contamination by top and bottom sealsOperating temperature -10ºC to +120°CWorking pressure 0.9 bar to 10 barPolished disc.
The Filmaster® filling loop designed to allow sealed ...
Description:
The Filmaster® filling loop designed to allow sealed heating systems to be charged via a temporary mains supply connection. 1/8in. BSP test port on isolating double check valve15mm compression connectionsProtects against Class 3 contamination risksBall valve with lever for easy ...
These Float Valves are suitable for pressures up ...
Description:
These Float Valves are suitable for pressures up to 14 bar (206 psi). WRC approvedRubber diaphragmDischarge above overflow level prevents back siphonage - meets requirements of Byelaw 42No hiss or prolonged shut-off noiseThumbscrew on lever provides vertical and horizontal adjustment ...
High quality brass valves. Manufactured in accordance with ...
Description:
High quality brass valves. Manufactured in accordance with BS5154 series BCompression ends are in accordance with BS864: part 2 (based on PN20), 5 bar at 120°C (hot)Solid taper wedge and non-rising spindleAsbestos-free gland packing, replaceable whilst in serviceSuitable for water ...