RS PRO Brass Single Non Return Valve 1-1/4 in BSPP

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

S.126 Brass Swing Check Valve

Application : Industry, pneumatics, hydraulic, plumbing installations
Operating Temperature : +0゚C / +90゚C
Operating pressure : PN12 1/2' to 1’’, PN10 1.1/4’’ to 2’’, PN8 2.1/2’’ to 4’’
Threads : ISO 228 parallel female threads
Metal seal
Compact inspection cap
100% Made in Italy
Low pressure drop
Water hammer resistant

Note

Approvals apply to specific configurations only

Approvals

GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
RoHS Compliant

Standards

BS5154/B - PN 16

Non Return/Check Valves - Swing Type

Non-return or check valves which allow flow in one direction only.

Warning

  • Freezing of the fluid in the installation may severely damage the valve
Specificaties
Kenmerk Waarde
Type Single
Connection 1-1/4 in BSPP
Body Material Brass
Maximum Working Pressure 16 bar
Thread Size 1-1/4in
Thread Standard BSP
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
18 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
26,62
(excl. BTW)
32,21
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
26,62 €
5 - 9
25,81 €
10 +
24,98 €
Related Products
For heating, sanitary and compressed air systems, pumps ...
Description:
For heating, sanitary and compressed air systems, pumps and autoclavesBody in hot forged DZR brassThreading to BS2779Hostaform inner valveSpring in 18//8 AISI 302-304 stainless steelHydrostatic test pressures 30 bar/435psi (shell), 22 bar/315psi (seat)Compact design, allows flow in one direction only, ...
Used to detect and inspect the flow of ...
Description:
Used to detect and inspect the flow of individual fluids, blocked valves or strainers or leakage of live steam through steam traps. Inspect colourIdentify vapour leakageDetect blocked flowAssess correct flow indication.
RS Pro Brand Screwed End Swing Check Valves ...
Description:
RS Pro Brand Screwed End Swing Check Valves that allow liquids to flow in only one direction. 1/2 - 3" (DN15 - DN80)W.P: 200 WOGW.T: -20°C - 200°C (-4°F - 392°F)Investment castingSocket weld (option)Thread type: ASME B1.20.1 (NPT), DIN 2999 ...
The Floguard range of double check valves is ...
Description:
The Floguard range of double check valves is used for the prevention of back-flow and back-syphonage contamination risks in accordance with the water supply (water fittings) Regulations 1999.Manufactured from DZR brass the WRAS approved Floguard range is supplied unplated with ...