Block 16kVA 3 Output Chassis Mounting Transformer, 380V ac, 400V ac, 420V ac

  • RS-stocknr. 738-7941
  • Fabrikantnummer TT3 16-4-4
  • Fabrikant Block
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

TT3 Series Transformers

Brought to you by Block, the TT3 series of 3 phase transformers are highly efficient and feature low heat loss. Fitted with easy-to-install mounting holes, the TT3 series transformers also feature screw terminal connections and integrated lifting eyes.

Features and Benefits:

• Safe electrical isolation 400V 3 phase input
• + and - 5% tappings on the secondary windings
• BLOCKIMPEX vacuum impregnation

Standards

IEC 61558-2-4 DIN EN 61558-2-4 VDE 0570 part 2-4

Approvals

UL 1561; CSA 22.2

Laminated

Specificaties
Kenmerk Waarde
Primary Voltage Rating 400V ac
Secondary Voltage Rating 380V ac, 400V ac, 420V ac
Power Rating 16kVA
Number of Outputs 3
Mounting Type Chassis
Length 550mm
Width 267mm
Depth 510mm
Dimensions 550 x 267 x 510mm
Fixing Hole Diameter M12
Weight 150kg
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
Maximum Temperature +50°C
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
2.328,96
(excl. BTW)
2.818,04
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
2.328,96 €
5 +
2.096,06 €
Related Products
Chassis mounting mains transformers with twin 115Va.c. 50/60Hz ...
Description:
Chassis mounting mains transformers with twin 115Va.c. 50/60Hz primary windings which may be connected in series for 230V or parallel for 115V operation. The two independent secondary windings may be connected in series or parallel to give a wide range ...
Chassis mounting low voltage mains transformers with a ...
Description:
Chassis mounting low voltage mains transformers with a single 230Va.c. 50/60Hz primary winding. The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options. Double section bobbin constructionFully ...
Low inrush current control, safety isolating and isolating ...
Description:
Low inrush current control, safety isolating and isolating transformerScrew type terminals, fitted with screw mounting bracketsCompact design with ±20V tappings on the primary windingFor use up to +40°C ambient maximum.
Secondary voltages are nominal load voltages on resistive ...
Description:
Secondary voltages are nominal load voltages on resistive loads.Only the pins indicated on the wiring diagram "physically" exist.