RS PRO 20VA 2 Output Chassis Mounting Transformer, 20V ac

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: PL
Productomschrijving

Chassis Mount, Clamp Construction, 230Vac, 6V to 50V

Chassis mounting low voltage mains transformers with a single 230Va.c. 50/60Hz primary winding. The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options.

Double section bobbin construction
Fully shrouded bobbins
Full varnish impregnation
Two hole fixing wrap-over clamps
Solder tag terminations
Optional terminal shrouds
100% electrical and flash tested
Tested in accordance with BS3535 and EN 60 742

Standards

BS3535; EN 60 742

Specificaties
Kenmerk Waarde
Primary Voltage Rating 230V ac
Secondary Voltage Rating 20V ac
Power Rating 20VA
Number of Outputs 2
Mounting Type Clamp Mount
Length 59mm
Width 57mm
Depth 50mm
Dimensions 59 x 57 x 50mm
Fixing Hole Diameter 4.7 x 8.7mm
Weight 550g
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
96 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
13,37
(excl. BTW)
16,18
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
13,37 €
10 - 24
11,30 €
25 - 49
10,40 €
50 - 99
9,57 €
100 +
8,80 €
Related Products
Short-circuit proof safety transformers in cast resin, fully ...
Description:
Short-circuit proof safety transformers in cast resin, fully encapsulated to supply 12 V halogen bulbs. Adjusting the voltage to the optimum setting for the transformer extends the service life of the halogen bulbsInput and output-end screw connection terminals with strain ...
RS Pro continuously rated separating transformer: 1.5 kVA ...
Description:
RS Pro continuously rated separating transformer: 1.5 kVA (short time: 5 min: 3kVA). These safety site transformers are high quality, UK manufactured to BSEN 61588 and fully compliant with reduced low voltage regulations. These Transformers are designed to isolate the ...
RS Pro 3 phase continuous site transformer is ...
Description:
RS Pro 3 phase continuous site transformer is high-quality UK manufactured, designed to ensure safe electrical distribution. These slimline site transformers are great for projects where space is a premium. They are fully certified to offer IP44 protection. Cables enter ...
Drive isolation transformers from SolaHD. DT series of ...
Description:
Drive isolation transformers from SolaHD. DT series of transformer is designed to handle the mechanical stress, voltage demands and harmonics associated with SCR (Silicon Control Rectifier) variable speed motor drive applications. The transformer must offer a voltage change to match ...