RS PRO 12VA 2 Output Chassis Mounting Transformer, 18V ac
- RS-stocknr.:
- 504-606
- Fabrikant:
- RS PRO
67 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 28,04
(excl. BTW)
€ 33,93
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 24 | € 28,04 |
| 25 + | € 25,26 |
- RS-stocknr.:
- 504-606
- Fabrikant:
- RS PRO
Wetgeving en conformiteit
- Land van herkomst:
- PL
Productomschrijving
Chassis Mount, Clamp Construction, 230Vac, 6VA to 50VA
Chassis mounting low voltage mains transformers with a single 230Va.c. 50/60Hz primary winding. The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options.
Features and Benefits
"Double section bobbin construction
Fully shrouded bobbins
Full varnish impregnation
Two hole fixing wrap-over clamps
Solder tag terminations
Optional terminal shrouds (example 503-912 )
100% electrical and flash tested
Tested in accordance with BS3535 and EN 60 742"
Chassis mounting low voltage mains transformers with a single 230Va.c. 50/60Hz primary winding. The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options.
Features and Benefits
"Double section bobbin construction
Fully shrouded bobbins
Full varnish impregnation
Two hole fixing wrap-over clamps
Solder tag terminations
Optional terminal shrouds (example 503-912 )
100% electrical and flash tested
Tested in accordance with BS3535 and EN 60 742"
Standards
BS3535; EN 60 742
Specificaties
Kenmerk | Waarde |
|---|---|
| Primary Voltage Rating | 230V ac |
| Secondary Voltage Rating | 18V ac |
| Power Rating | 12VA |
| Number of Outputs | 2 |
| Mounting Type | Clamp Mount |
| Length | 59mm |
| Width | 50mm |
| Depth | 50mm |
| Dimensions | 59 x 50 x 50mm |
| Fixing Hole Diameter | 4.7 x 8.7mm |
| Weight | 400g |
| Minimum Operating Frequency | 50Hz |
| Maximum Operating Frequency | 60Hz |