RS PRO 75VA 2 Output Chassis Mounting Transformer, 50V ac

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: PL
Productomschrijving

Chassis Mount Frame 75VA to 200VA

The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options.

Optional terminal shrouds for 75VA and 100VA(503-928)

Approvals

8888

Standards

BS3535; EN 60 742

Laminated Frame 230Vac Primary 75VA to 200VA (Multi Tapped)

Chassis mounting frame construction low voltage mains transformers with a single 230Vac 50/60Hz primary winding.

Double section bobbin construction
Fully shrouded bobbins
Full varnish impregnation
Multi-hole frame fixing
Solder tag terminations
100% electrical and flash tested
Tested in accordance with BS3535 and EN 60 742

Specificaties
Kenmerk Waarde
Primary Voltage Rating 230V ac
Secondary Voltage Rating 50V ac
Power Rating 75VA
Number of Outputs 2
Mounting Type Chassis
Length 79mm
Width 75mm
Depth 65mm
Dimensions 79 x 75 x 65mm
Fixing Hole Diameter 4.7 x 7.9mm
Weight 1.5kg
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
28,18
(excl. BTW)
34,10
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
28,18 €
10 - 24
25,20 €
25 - 49
23,18 €
50 - 99
21,32 €
100 +
19,62 €
Related Products
Multi-tapped secondary winding. Suitable for a wide range ...
Description:
Multi-tapped secondary winding. Suitable for a wide range of applications requiring selected secondary voltages. Double section bobbin constructionFully shrouded bobbinsFull varnish impregnationMulti-hole frame fixingSolder tag terminations100% electrical and flash testedTested in accordance with BS3535 and EN 60 742.
High quality safety and isolating transformers designed for ...
Description:
High quality safety and isolating transformers designed for use in control circuits and general applications Low loss noise laminations Dual standard primary winding 230 / 400Vac with +15V tap for input flexibility Dual secondaries are centre tapped. Earth terminal provided ...
Chassis mounting frame construction low voltage mains transformers ...
Description:
Chassis mounting frame construction low voltage mains transformers with a single 230Vac 50/60Hz primary winding. Single-phase single-winding safety and isolation transformers.Able to supply higher powers on occasion.Feature a panel display to reduce ESD. Screw termination.Plate mounting.
Short-circuit proof safety transformers in cast resin, fully ...
Description:
Short-circuit proof safety transformers in cast resin, fully encapsulated to supply 12 V halogen bulbs. Adjusting the voltage to the optimum setting for the transformer extends the service life of the halogen bulbsInput and output-end screw connection terminals with strain ...