Texas Instruments MAX660M/NOPB, Charge Pump Inverting, Step Up, -5.5 → -1.5 V 8-Pin, SOIC

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Inverting Charge Pump Converters, Texas Instruments

Charge Pump Converters, Texas Instruments

The easy-to-use inductorless Charge Pump ICs from Texas Instruments offer a small-sized, simpler solution with high performance. The charge pump or switched-capacitor converter is an alternative solution to inductive DC-DC converters and delivers higher efficiency than Low Dropout (LDO) regulators.

Buck (Step-Down), Boost (Step-Up) and Inverting topologies

Specificaties
Kenmerk Waarde
Converter Type Inverting, Step Up
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Dimensions 4.9 x 3.9 x 1.45mm
Height 1.45mm
Length 4.9mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +85 °C
Maximum Output Voltage -1.5 V
Minimum Operating Supply Voltage 1.5 V
Minimum Output Voltage -5.5 V
Minimum Operating Temperature -40 °C
Width 3.9mm
1140 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Tube of 95)
1,427
(excl. BTW)
1,727
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
95 - 380
1,427 €
135,565 €
475 - 855
1,145 €
108,775 €
950 +
0,999 €
94,905 €
*prijsindicatie
Related Products
The battery charge monitoring system is the component ...
Description:
The battery charge monitoring system is the component responsible for determining the energy remaining in the battery. It provides information such as remaining battery capacity (mAh), state-of-charge (%), and battery voltage (mV). It minimises dependence on host processor and improves ...
The battery charge monitoring system is the component ...
Description:
The battery charge monitoring system is the component responsible for determining the energy remaining in the battery. It provides information such as remaining battery capacity (mAh), state-of-charge (%), and battery voltage (mV). It minimises dependence on host processor and improves ...
The Li-ion battery charge monitors use the patented ...
Description:
The Li-ion battery charge monitors use the patented Impedance Track™ algorithm for battery fuel gauging, and provide information such as remaining battery capacity (mAh), state-of-charge (%), and battery voltage (mV). It minimises dependence on host processor and improves standby power. ...
The LM258x series of SIMPLE SWITCHER® regulators are ...
Description:
The LM258x series of SIMPLE SWITCHER® regulators are designed for flyback, step-up (boost), SEPIC, and forward converter applications. Requires few external componentsOutput voltage versions: 5V, 12V, and adjustableFamily of standard inductors and transformersWide input voltage range: 4V to 40VCurrent-mode ...