Machinable Glass Ceramic Rod, 300mm x 10mm diameter

  • RS-stocknr. 225-5549
  • Fabrikant MACOR
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Macor® Machinable Glass Ceramic

Macor® is a registered trademark of Corning Inc.

For the manufacture of precision components utilising ordinary metalworking tools
No post firing required
Non-wetting, 0% porosity and no deformation
Max no load temperature: 1000°C
Continuous operating temperature: 800°C
Machining tolerances approach 0.013mm (polished smoothness of 0.013mm is achievable)
Can be sealed and joined to itself and to other materials
White in colour

Note

Trial pack (RS Stock number 158-3203) contents: 1 of 10dia x 50mm Rod, 1 of 10x10x25mm Sq Bar, 1 of 25x50x3mm Sheet

Specificaties
Kenmerk Waarde
Material Machinable Glass Ceramic
Form Rod
Length 300mm
Rod Diameter 10mm
Colour White
Thermal Conductivity 1.46W/mK
Density 2.52g/cm³
Hardness A 48 Rockwell
Compressive Strength 35kg/mm²
Fracture Toughness 1.53MPa
Water Absorption 0%
Maximum Operating Temperature +800°C
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
23 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
130,21
(excl. BTW)
157,55
(incl. BTW)
Aantal stuks
Per stuk
1 - 2
130,21 €
3 - 9
121,10 €
10 - 29
114,59 €
30 +
104,17 €
Related Products
Typical applications include valve seats in steam and ...
Description:
Typical applications include valve seats in steam and water mixers, components in a high temperature diesel engine turbo actuators etc. Continuous working temperature approx 250°CNo significant degradation in steam or high pressure water environmentsCan absorb over 1000 Mrads of radiation ...
Black extruded Nylon 6 containing MoS2. Good sliding ...
Description:
Black extruded Nylon 6 containing MoS2. Good sliding and dry running propertiesResistant to oils, grease, petrol etc.Easily welded, bonded, machined and polishedUV and weather resistantSuitable for friction bearings/strips, gears, castors, pulleys, chains, wheels and machine parts etcBlack in colourTolerance ...
PEEK GF30 is a 30% glass fibre reinforced ...
Description:
PEEK GF30 is a 30% glass fibre reinforced material offering extremely high dimensional stability together with very high thermal-mechanical strength. Suitable for use in highly demanding applications including thermal/electrical insulators, plug parts, high thermal/mechanical loaded parts and support rings etc. ...
Black PEEK modified with the addition of carbon, ...
Description:
Black PEEK modified with the addition of carbon, graphite and PTFE to offer optimised properties for demanding bearing and friction requirements. Good sliding properties even without lubrication/high wear resistanceHigh thermal mechanical bearing strengthGood chemical/radiation (gamma) resistanceVery rigid/high ...