RS PRO, 2.5A Glass Cartridge Fuse, 5 x 20mm, Speed T

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

Glass cartridge fuses are ideal for providing protection to devices or internal circuits from short circuits and overcurrent. They are deliberately weaker components which, when too much current is drawn, will blow. Once the fuse has blown it will need replacing in order to make the circuit complete and allow the flow of current.

Features:
Glass cartridge
5 x 20 mm cartridge size
T Speed Rating
Anti-surge
Low Breaking Capacity

Typical applications:
Cartridge fuses are a relatively cheap way of protecting electrical equipment from short circuits and overcurrent and can be used to protect electrical appliances such as motors air-conditions, refrigerator, pumps etc. They can be found in the following areas:
Industrial
Commercial
Home/Residential
Automotive

Additional Information:

Why choose a glass fuse?
Glass and ceramic fuses have similar properties. However you may choose a glass fuse as it enables you to see the inside of the fuse. Therefore it is easier to determine whether the fuse has blown.

What size is it?
5x20 mm is a standard cartridge size and it measures approximately 20 mm long by 5 mm in diameter. They are popular in board and panel protection and will fit a compatible 5x20 fuse holder.

What Speed is it?
This particular fuse is “T” speed rated which means it is a slow acting fuse, sometimes referred to as anti-surge. It is able to tolerate higher levels for a short period, without shorting. Therefore, if a sudden change occurs, this fuse will not blow immediately. They are suitable for applications where a sudden flow of high current is required.

What is Breaking Capacity?
Breaking capacity is the level of current that the fuse can safely handle without exploding or rupturing. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. This particular fuse is LBC (Low Breaking Capacity).

Why RS PRO?

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Approvals

SEMKO,BSI,VDE,CSA

Specificaties
Kenmerk Waarde
Current Rating 2.5 A
Fuse Size 5 x 20mm
Fuse Speed T
Voltage Rating 250 V ac
Overall Length 20mm
Diameter 5mm
Body Material Glass
200 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
800 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
0,129
(excl. BTW)
0,156
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
0,129 €
12,90 €
500 - 900
0,121 €
12,10 €
1000 - 2400
0,111 €
11,10 €
2500 - 4900
0,10 €
10,00 €
5000 +
0,09 €
9,00 €
*prijsindicatie
Related Products
RS PRO range of miniature ceramic cartridge fuses ...
Description:
RS PRO range of miniature ceramic cartridge fuses which are ultra-rapid (FF) that operate at higher temperatures so are ideal to provide circuit protection to semiconductor devices. They are ideal for providing protection to devices or internal circuits from short ...
RS PRO anti-surge ceramic cartridge fuses which are ...
Description:
RS PRO anti-surge ceramic cartridge fuses which are designed to prevent damage to electrical equipment. These fuses allow an electric current to flow through until the current goes over the fuses rating then it will blow and stop the flow ...
Schurter FST series cartridge fuses are a miniature ...
Description:
Schurter FST series cartridge fuses are a miniature fuse that is a fast acting non-resettable fuse.The fuse has a glass body with nickel plated alloy end caps. These fuses are quick acting fuses with an F speed rating.FeaturesQuick acting fuses.size ...
Anti-surge ceramic cartridge fuses are designed to prevent ...
Description:
Anti-surge ceramic cartridge fuses are designed to prevent damage to electrical equipment. These fuses allow an electric current to flow through until the current goes over the fuses rating then it will blow and stop the flow of electricity. This ...