Microchip MCP2561T-E/SN, CAN Transceiver 1Mbit/s 1-Channel ISO 11898-2, ISO 11898-5, 8-Pin SOIC

  • RS-stocknr. 177-3154
  • Fabrikantnummer MCP2561T-E/SN
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The MCP2561/2FD is a Microchip Technology Inc. second generation high-speed CAN transceiver. It offers the same features as the MCP2561/2. Additionally, it guarantees Loop Delay Symmetry in order to support the higher data rates required for CAN FD. The maximum propagation delay was improved to support longer bus length.The device family members are MCP2561FD with SPLIT pin & MCP2562FD with VIO pin

Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation
Maximum Propagation Delay: 120 ns
Loop Delay Symmetry: -10%/+10% (2 Mbps)
Very Low Standby Current (5 μA, typical)
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O
SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes
CAN Bus Pins are

Specificaties
Kenmerk Waarde
Maximum Data Rate 1Mbit/s
Number of Transceivers 1
Standard Supported ISO 11898-2, ISO 11898-5
Power Down Mode Normal, Standby
Maximum Supply Current 70 mA
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Dimensions 4.9 x 3.9 x 1.5mm
Length 4.9mm
Width 3.9mm
Height 1.5mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage 4.5 V
Automotive Standard AEC-Q100
510 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
0,733
(excl. BTW)
0,887
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 20
0,733 €
7,33 €
30 +
0,704 €
7,04 €
*prijsindicatie
Verpakkingsopties
Related Products
The Microchip MTCH652 is a Driver IC designed ...
Description:
The Microchip MTCH652 is a Driver IC designed to drive High-Voltage Outputs in Capacitive Touch applications. The MTCH652 combines a Boost Converter with 19 Level Shifters to drive up to 19 channels.The device is programmable via a Configuration (CONFIG) registers. ...
400kbps I²C-Compatible Serial Interface2V to 5.5V Operation5V Overvoltage ...
Description:
400kbps I²C-Compatible Serial Interface2V to 5.5V Operation5V Overvoltage Tolerant I/OsSupports Hot Insertion16 I/O Pins that Default to Inputs on Power-UpOpen-Drain Interrupt Output (Active-Low INT)Bus Timeout for Lock-Up-Free OperationNoise Filter on SCL/SDA Inputs64 User-Selectable Slave ID AddressesLow Standby ...
Integrated Protection Ensures for Robust Communication±65V Fault Protection ...
Description:
Integrated Protection Ensures for Robust Communication±65V Fault Protection Range on Driver Outputs/Receiver Inputs±25V Common Mode Range on the Receiver InputsLarge Receiver Hysteresis Increases Noise ToleranceHot-Swap ProtectionThermal Shutdown High-Performance Transceiver Enables Flexible Designs 20Mbps ...
The 74VHC240FT and 74VHC244FT are advanced high speed ...
Description:
The 74VHC240FT and 74VHC244FT are advanced high speed CMOS OCTAL BUS BUFFERs fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The 74VHC240FT is ...