Microchip Technology MCP2562T-E/SN, CAN Transceiver 1Mbit/s 1-Channel, 8-Pin SOIC

  • RS-stocknr. 177-2857
  • Fabrikantnummer MCP2562T-E/SN
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device family members are: • MCP2561 with SPLIT pin • MCP2562 with VIO pin

Supports 1 Mb/s operation
Implements ISO-11898-5 standard physical layer requirements
Very low standby current (Typ: 5μA)
VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O
SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes
CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus
Detection of ground fault, Permanent dominant detection on TXD, Permanent dominant detection on bus
Power-on Reset and voltage brown-out protectionon VDD and VIO pin

Specificaties
Kenmerk Waarde
Maximum Data Rate 1Mbit/s
Number of Transceivers 1
Power Down Mode Normal, Standby
Maximum Supply Current 70 mA
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Dimensions 4.9 x 3.9 x 1.5mm
Length 4.9mm
Width 3.9mm
Height 1.5mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage 4.5 V
Automotive Standard AEC-Q100
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 30/06/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 3300)
0,61
(excl. BTW)
0,74
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3300 +
0,61 €
2.013,00 €
*prijsindicatie