- RS-stocknr.:
- 432-025
- Fabrikantnummer:
- 500-171-30
- Fabrikant:
- Mitutoyo
- RS-stocknr.:
- 432-025
- Fabrikantnummer:
- 500-171-30
- Fabrikant:
- Mitutoyo
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- JP
Productomschrijving
Mitutoyo-Absolute
Electronic calipers with an LCD display which will display in either metric/imperial (switchable) or metric only reading depending on model.
General Features:
Fully hardened stainless steel beam & jaws with an anti-glare, satin chrome finish
All measuring surfaces are ground and lapped for high accuracy
Capable of measuring: inside, outside, depth and step
Storage Temp: -10°C to +60°C
Operating Temp: 0°C to +40°C
Capable of measuring: inside, outside, depth and step
Storage Temp: -10°C to +60°C
Operating Temp: 0°C to +40°C
Electronic Features:
ON/OFF - Switches unit on, display indicates distance of jaws from pre-set origin point
ABS - Absolute feature re-sets the reference point of measurement of the instrument jaws
in./mm - Selects imperial or metric display
Origin - Pre-sets the zero point of the instrument. This point is memorised even if the unit is switched off
ABS - Absolute feature re-sets the reference point of measurement of the instrument jaws
in./mm - Selects imperial or metric display
Origin - Pre-sets the zero point of the instrument. This point is memorised even if the unit is switched off
Note
Imperial/metric versions have thumbwheel where metric does not.
SPC output versions - A connection port continually transmits data (MITUTOYO FORMAT). 1m/2m leads are available separately, see this section
SPC output versions - A connection port continually transmits data (MITUTOYO FORMAT). 1m/2m leads are available separately, see this section
Supplied with
SR44 Battery
Specificaties
Kenmerk | Waarde |
---|---|
Caliper Type | Digital Caliper |
Capacity | 150mm, 6in |
Imperial or Metric | Imperial, Metric |
Display Type | Digital |
Accuracy | ±0.001 in |
Resolution | 0.01 mm |