Legrand Light Duty 90° Flat Bend Pre-Galvanised Steel Cable Tray Bend, 75 mm Width, 12mm Depth

  • RS-stocknr. 798-9461
  • Fabrikantnummer SSB75PG
  • Fabrikant Legrand
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Swifts® SS Light Duty Flat Bends

Pre-galvanised 90° flat bends

Legrand Swifts® SS Light Duty Cable Tray

Specificaties
Kenmerk Waarde
Accessory Type Light Duty 90° Flat Bend
Material Pre-Galvanised Steel
Width 75 mm
Depth 12mm
Series Swifts
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 2)
4,735
(excl. BTW)
5,729
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 8
4,735 €
9,47 €
10 - 48
4,595 €
9,19 €
50 +
4,455 €
8,91 €
*prijsindicatie
Related Products
PVC cable tray covers available in lengths of ...
Description:
PVC cable tray covers available in lengths of 3 metres. Easy to installEco-friendly: PVC is 100% recyclableCan be installed inside and outsideSuitable for use in chemical or petrochemical industries, paper or food processingSuitable for use in commercial environments like storage ...
PVC couplers for PVC cable tray. Straight coupler: ...
Description:
PVC couplers for PVC cable tray. Straight coupler: RS 125-1633; hinged coupler: RS 125-1634. Easy to installEco-friendly: PVC is 100% recyclableCan be installed inside and outsideSuitable for use in chemical or petrochemical industries, paper or food processingSuitable for use in ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for ...
Cable management return edge trunking and fittings manufactured ...
Description:
Cable management return edge trunking and fittings manufactured from 304 stainless steel with a brushed finish. Ideal for applications in the food, brewing, dairy, pharmaceutical and chemical industries. Their aesthetically pleasing finishes also lend towards architectural applications. Trunking lid is ...