Legrand Trapeze Hanger Hot Dip Galvanised Steel Support Rail, 150 mm Width

  • RS-stocknr. 163-3086
  • Fabrikantnummer LTH150G
  • Fabrikant Legrand
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for each width and method of fi†ing is given in the table

Specificaties
Kenmerk Waarde
Accessory Type Trapeze Hanger
Material Hot Dip Galvanised Steel
For Use With M10 Threaded Rod
Duty Type Heavy Duty, Light Duty, Medium Duty
Series LTH
Tray and Basket Type Cable Tray
Width 150 mm
11 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
6,40
(excl. BTW)
7,74
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
6,40 €
10 +
5,76 €
Related Products
PVC cantilever support arms for PVC condiut. Easy ...
Description:
PVC cantilever support arms for PVC condiut. Easy to installEco-friendly: PVC is 100% recyclableCan be installed inside and outsideSuitable for use in chemical or petrochemical industries, paper or food processingSuitable for use in commercial environments like storage areas, car parks ...
PVC M8 nut and bolt for Cablofil PVC ...
Description:
PVC M8 nut and bolt for Cablofil PVC cable tray. Easy to installEco-friendly: PVC is 100% recyclableCan be installed inside and outsideSuitable for use in chemical or petrochemical industries, paper or food processingSuitable for use in commercial environments like storage ...
Pre-galvanised medium duty equal tees. ...
Description:
Pre-galvanised medium duty equal tees.
Hot dip galvanised after manufacture. ...
Description:
Hot dip galvanised after manufacture.