Legrand Trapeze Hanger Hot Dip Galvanised Steel Support Rail, 100 mm Width

  • RS-stocknr. 163-3085
  • Fabrikantnummer LTH100G
  • Fabrikant Legrand
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for each width and method of fi†ing is given in the table

Specificaties
Kenmerk Waarde
Accessory Type Trapeze Hanger
Material Hot Dip Galvanised Steel
Series LTH
For Use With M10 Threaded Rod
Duty Type Heavy Duty, Light Duty, Medium Duty
Width 100 mm
Tray and Basket Type Cable Tray
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 22/09/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
6,20
(excl. BTW)
7,50
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
6,20 €
10 +
5,57 €
Related Products
Bends, risers, tee pieces, and couplers The bends ...
Description:
Bends, risers, tee pieces, and couplers The bends and risers are adjustable between 0° and 90° The coupler set will join two lengths of tray.
Cantilever arms enable horizontal runs of cable tray ...
Description:
Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with ...
Cantilever arms enable horizontal runs of cable tray ...
Description:
Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with ...
Pre-galvanised medium duty equal tees. ...
Description:
Pre-galvanised medium duty equal tees.