Legrand Cantilever Arm Bracket Stainless Steel Cable Tray Fixing Plate, 75 mm Width, 65mm Depth

  • RS-stocknr. 163-3076
  • Fabrikantnummer LCA75S
  • Fabrikant Legrand
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with a bottom flange on arms 225 mm wide and above for extra strength Supplied singly without fasteners

Specificaties
Kenmerk Waarde
Accessory Type Cantilever Arm Bracket
Material Stainless Steel
Corrosion Protection Type Stainless Steel
Duty Type Heavy Duty, Light Duty, Medium Duty
Depth 65mm
Series LCA
Width 75 mm
Tray and Basket Type Cable Tray
For Use With Flat Surface Tray, Swiftrack Channel
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 22/07/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
14,73
(excl. BTW)
17,82
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
14,73 €
10 +
13,25 €
Related Products
Bends, risers, tee pieces, and couplers The bends ...
Description:
Bends, risers, tee pieces, and couplers The bends and risers are adjustable between 0° and 90° The coupler set will join two lengths of tray.
PVC cable tray covers available in lengths of ...
Description:
PVC cable tray covers available in lengths of 3 metres. Easy to installEco-friendly: PVC is 100% recyclableCan be installed inside and outsideSuitable for use in chemical or petrochemical industries, paper or food processingSuitable for use in commercial environments like storage ...
Cantilever arms are for universal mounting and used ...
Description:
Cantilever arms are for universal mounting and used to support steel wire cable trays. The arms are wall mounted or use channel and EDF mounting rails. Quick and easy to use. Cantilever armsCompactUniversal mountingWall, Channel and EDF mountsSupport steel wire ...
The Cablofil International cable tray is a bend ...
Description:
The Cablofil International cable tray is a bend connector from the CM series. It is made of 316 stainless steel material and is 300mm wide. It used in pairs on side rails for steel cable tray. Plated with ecologic zinc, ...